Thread: The King
View Single Post
Old 2nd December 2004, 12:28 PM   #35 (permalink)
Roger Brown
VENDOR
 
Join Date: Nov 2004
Posts: 17
Default

Al:

We achieved the lamp life utiizing a lesser expensive lamp combination with the new design. Don Smith tested the Pendentive design and found that the output was near 75% of the original lamp life on a unit that had been ran consistantly for over 400 hours straight. This si where the industry need ot go. I am glad to see that yo also have the salon owner's best interest at hand.

It sounds as though the KING is designed with a set of wiring circuits (tap transformer control circuits) that will allow the unit to have the input voltage either increased of decrease (automatically varing output strength by the voltage factor). This would allow the "UVB" to remain constantly the same, except for dosage output that would be directly controlled by output power. This would elliminate the concerned of the "B" staying within the 10% factor rrequired by FDA, almost. Slick idea...more or less tanning to the cleint depending on input voltage settings and still meeting the FDA's criteria.

Was this your idea???
Roger Brown is offline   Reply With Quote