TanToday - Helping Salon Owners, One At A Time, Since 2000! - View Single Post - T-max UltraBronz issue

Brian Oshman · 26th March 2006, 07:53 PM

Board in the bed.

The manager is just a controller and if it were that, all of your timers would experience the problem.

Try pluging and unpluging the T-max phone cords several times on the UB unit to clean up the contacts, that might help.

Have you added anything new to the salon that causes interference?... i.e. neon, cordless phones, refrigerators.

Do you have any flickering florescent lighting in the ceiling or lamps in the beds?

Is there a HP lamp on the fritz?

All of these things can create transiesents the affect digital equipment.

P.S. T-Max does not make the timer board for that bed, it was made by Barclay utilizing t-max protocol to operate with t-max manager.

26th March 2006, 07:53 PM	#3 (permalink)
Brian Oshman Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 7,280	Re: T-max UltraBronz issue Board in the bed. The manager is just a controller and if it were that, all of your timers would experience the problem. Try pluging and unpluging the T-max phone cords several times on the UB unit to clean up the contacts, that might help. Have you added anything new to the salon that causes interference?... i.e. neon, cordless phones, refrigerators. Do you have any flickering florescent lighting in the ceiling or lamps in the beds? Is there a HP lamp on the fritz? All of these things can create transiesents the affect digital equipment. P.S. T-Max does not make the timer board for that bed, it was made by Barclay utilizing t-max protocol to operate with t-max manager. __________________ Three can keep a secret if two are dead.