TanToday - Helping Salon Owners, One At A Time, Since 2000! - View Single Post - Tmax showing zero in room after putting client in.

Saturn Boy · 20th November 2007, 10:40 AM

I've seen that happen in salontouch/suntouch when the timer values need to be adjusted in the setup section. IF you are using suntouch/salontouch....i'd call them and ask them to step you through configuring your timer values.

Just FYI....its under SETUP - and either ROOMS or STATIONS- Look for TIMER or ADVANCED....depending on what software you r running.

Good Luck

20th November 2007, 10:40 AM	#9 (permalink)
Saturn Boy All Star Join Date: Nov 2004 Location: Goshen, Indiana Posts: 179	Re: Tmax showing zero in room after putting client in. I've seen that happen in salontouch/suntouch when the timer values need to be adjusted in the setup section. IF you are using suntouch/salontouch....i'd call them and ask them to step you through configuring your timer values. Just FYI....its under SETUP - and either ROOMS or STATIONS- Look for TIMER or ADVANCED....depending on what software you r running. Good Luck