TanToday - Helping Salon Owners, One At A Time, Since 2000! - View Single Post - T-max only running half of equipment

Brian Oshman · 29th December 2007, 01:31 PM

There is no need for timers in the empty rooms. You just need to connect the empty rooms together and re-scan the manager and it will pick up all of the current numbers you have set on the beds allready.

Go into the rooms that you emptied and cut the plugs off and connect the wires together color for color, insulate them and then re- power the manager. It will pick up the remaining beds with the correct room numbers so there is no need to change software settings. The beds that were removed will be ignored.

Couplers will not work since they flip the wire pattern.

29th December 2007, 01:31 PM	#13 (permalink)
Brian Oshman Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 7,257	Re: T-max only running half of equipment There is no need for timers in the empty rooms. You just need to connect the empty rooms together and re-scan the manager and it will pick up all of the current numbers you have set on the beds allready. Go into the rooms that you emptied and cut the plugs off and connect the wires together color for color, insulate them and then re- power the manager. It will pick up the remaining beds with the correct room numbers so there is no need to change software settings. The beds that were removed will be ignored. Couplers will not work since they flip the wire pattern. __________________ Three can keep a secret if two are dead.