TanToday - Helping Salon Owners, One At A Time, Since 2000! - View Single Post

Brian Oshman · 24th June 2008, 04:29 PM

Overdriven lamps turn black immediately. That is just the nature of the beast. There is nothing you will be able to do about that. Black ends do not hinder performance. They turn black due to such high wattage which develops high heat at the lamp ends. All of these overdriven units will require lamp changes at around 200-250 hours. Nothing new. All high power units (beds and booths) are like this.

As for the door falling off, the Jacka$$es probably stripped out the mounting holes by overtightening and the screws just pulled out. Installer error.

Cyclone HP is private label Tan America HP standup.

24th June 2008, 04:29 PM	#2 (permalink)
Brian Oshman Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 7,034	Re: 250 max Overdriven lamps turn black immediately. That is just the nature of the beast. There is nothing you will be able to do about that. Black ends do not hinder performance. They turn black due to such high wattage which develops high heat at the lamp ends. All of these overdriven units will require lamp changes at around 200-250 hours. Nothing new. All high power units (beds and booths) are like this. As for the door falling off, the Jacka$$es probably stripped out the mounting holes by overtightening and the screws just pulled out. Installer error. Cyclone HP is private label Tan America HP standup. __________________ Three can keep a secret if two are dead.