Who makes the best HP Stand Up Booth - Page 5 - TanToday

EliteMike · 13th August 2007, 04:47 PM

We should combine this into one thread since it became a Magic thread, or start a new one discussing the pros and cons of HP on the market

Brian Oshman · 13th August 2007, 04:53 PM

It is fine the way it is.

John · 13th August 2007, 05:02 PM

They could also purchase standard sockets for about $16.00 each, then relamp with the exact same lamp from Heraeus for about 1/2 the cost.

BIG AL · 13th August 2007, 05:57 PM

So John if you were going to buy a HP bed, which one would you choose?

John · 14th August 2007, 09:21 AM

Depends on what the competition had & the rest of the mix in my salon. They all have pros & cons.

Some have higher UVB
Some have tons of UVA
Some have a nice balance of both
Some have great looks
Some suck......

I would have to admit that it would be either the Magic 636, ISO Italia Matrix ER or the Mastersun 360.

If I was looking for more UVB, faster more immediate results, I would definitely look into the 1050 & the Leonardo.

I certainly would lean towards purchasing an Italian made unit.

BIG AL · 14th August 2007, 05:16 PM

I think you could do well with any of your top three.
I don't like a high uvb in a HP bed. I think it defeats the advantages
of high pressure.

KoolTanz · 14th August 2007, 05:59 PM

I would like to see a poll about which sunless unit is the best....

solarmeter® · 14th August 2007, 06:38 PM

They all suck. Go hangout on the sunless forum... the vitamin d-less forum... the skin staining forum. Ugh.

Brian Oshman · 14th August 2007, 09:53 PM

Quote:

They all suck. Go hangout on the sunless forum... the vitamin d-less forum... the skin staining forum. Ugh.

Yeah, phuck that sticky, nasty $h!t!

John · 15th August 2007, 08:36 AM

how about a poll on which Sunless company promoted the most negative press of UV tanning.........

phattmatt · 15th August 2007, 11:20 AM

Apology please, from the one that stated the following BS:

I know that, so post a pic of a meter reading at the bench of what that Boat Anchor® is lacking.

Probably puts out high 50's, low 60's. High B cooker. Toy.
__________________

solarmeter® · 15th August 2007, 11:49 AM

Hey Matt... a couple years ago you actually posted a set of Tanses meter readings. What were they? I forgot. They weren't "bad" as I recall. Don't remember if they were LP or HP.

Any Pics?

phattmatt · 15th August 2007, 12:25 PM

1994 Entropy 360 readings for top lamps:

5.0 solarmeter = 109
6.0 solarmeter = 1.36
7.0 solarmeter = 21.1

No pictures, just a notebook full of meter readings on tons of lamps over the years.

solarmeter® · 15th August 2007, 01:02 PM

Not bad! Not bad at all.

Plenty of UVA.
1.25% UVB
11.4 minutes to 4 MEDs Te

Brian Oshman · 15th August 2007, 03:21 PM

Quote:

Originally Posted by phattmatt

Apology please, from the one that stated the following BS:

I know that, so post a pic of a meter reading at the bench of what that Boat Anchor® is lacking.

Probably puts out high 50's, low 60's. High B cooker. Toy.
__________________

Pfff! It took pulling teeth to get some numbers.

solarmeter® · 15th August 2007, 06:52 PM

I don't think that would cook a deer © any more faster than a 636 or whatever else have you.... except maybe an original BlackSun HP. Certainly not a boat anchor ® imo.

© Deer Cooker - copyright David R Unvert circa 2002.
® Boat Anchor - registered trademark of Brian Oshman circa 2003.

Din · 15th August 2007, 07:08 PM

Hence™!

solarmeter® · 15th August 2007, 07:31 PM

™ Hence - unregistered trademark of Din? Or who?

Brian Oshman · 15th August 2007, 08:18 PM

Quote:

5.0 solarmeter = 109
6.0 solarmeter = 1.36
7.0 solarmeter = 21.1

I agree, those are good numbers for that.

tanmeperfect · 27th February 2008, 01:07 PM

saturn is the best by far

View Poll Results: Who makes the best HP Standup?
Miracle Sun Saturn	27	52.94%
Sportarredo HPO	12	23.53%
ETS Velocity	1	1.96%
Tan America Matrix V28	6	11.76%
Tanses Entropy 35	5	9.80%
Voters: 51. You may not vote on this poll

13th August 2007, 04:47 PM	#81 (permalink)
EliteMike Hall of Famer Join Date: May 2007 Posts: 5,712	Re: Who makes the best HP Stand Up Booth We should combine this into one thread since it became a Magic thread, or start a new one discussing the pros and cons of HP on the market

13th August 2007, 04:53 PM	#82 (permalink)
Brian Oshman Hall of Famer Join Date: Nov 2004 Posts: 9,276	Re: Who makes the best HP Stand Up Booth It is fine the way it is. __________________ Brian Oshman (click for private message) The Sun Doctor Authorized Supra® Dealer (click for website) 908-797-0716 Brianoshman@aol.com (click for e-mail) ITA Member 2010 Someone has to say it

13th August 2007, 05:02 PM	#83 (permalink)
John Hall of Famer Join Date: Nov 2004 Posts: 2,919	Re: Who makes the best HP Stand Up Booth They could also purchase standard sockets for about $16.00 each, then relamp with the exact same lamp from Heraeus for about 1/2 the cost. __________________ John Hayes Ultraviolet Resources International

13th August 2007, 05:57 PM	#84 (permalink)
BIG AL Hall of Famer Join Date: Nov 2004 Posts: 1,385	Re: Who makes the best HP Stand Up Booth So John if you were going to buy a HP bed, which one would you choose?

14th August 2007, 09:21 AM	#85 (permalink)
John Hall of Famer Join Date: Nov 2004 Posts: 2,919	Re: Who makes the best HP Stand Up Booth Depends on what the competition had & the rest of the mix in my salon. They all have pros & cons. Some have higher UVB Some have tons of UVA Some have a nice balance of both Some have great looks Some suck...... I would have to admit that it would be either the Magic 636, ISO Italia Matrix ER or the Mastersun 360. If I was looking for more UVB, faster more immediate results, I would definitely look into the 1050 & the Leonardo. I certainly would lean towards purchasing an Italian made unit. __________________ John Hayes Ultraviolet Resources International

14th August 2007, 05:16 PM	#86 (permalink)
BIG AL Hall of Famer Join Date: Nov 2004 Posts: 1,385	Re: Who makes the best HP Stand Up Booth I think you could do well with any of your top three. I don't like a high uvb in a HP bed. I think it defeats the advantages of high pressure.

14th August 2007, 05:59 PM	#87 (permalink)
KoolTanz Veteran Join Date: Dec 2006 Posts: 299	Re: Who makes the best HP Stand Up Booth I would like to see a poll about which sunless unit is the best....

14th August 2007, 06:38 PM	#88 (permalink)
solarmeter® UV Geek Squad Join Date: Nov 2004 Posts: 4,059	Re: Who makes the best HP Stand Up Booth They all suck. Go hangout on the sunless forum... the vitamin d-less forum... the skin staining forum. Ugh.

15th August 2007, 08:36 AM	#90 (permalink)
John Hall of Famer Join Date: Nov 2004 Posts: 2,919	Re: Who makes the best HP Stand Up Booth how about a poll on which Sunless company promoted the most negative press of UV tanning......... __________________ John Hayes Ultraviolet Resources International

15th August 2007, 11:20 AM	#91 (permalink)
phattmatt Moderator Join Date: Nov 2004 Posts: 3,094	Re: Who makes the best HP Stand Up Booth Apology please, from the one that stated the following BS: I know that, so post a pic of a meter reading at the bench of what that Boat Anchor® is lacking. Probably puts out high 50's, low 60's. High B cooker. Toy. __________________

15th August 2007, 11:49 AM	#92 (permalink)
solarmeter® UV Geek Squad Join Date: Nov 2004 Posts: 4,059	Re: Who makes the best HP Stand Up Booth Hey Matt... a couple years ago you actually posted a set of Tanses meter readings. What were they? I forgot. They weren't "bad" as I recall. Don't remember if they were LP or HP. Any Pics?

15th August 2007, 12:25 PM	#93 (permalink)
phattmatt Moderator Join Date: Nov 2004 Posts: 3,094	Re: Who makes the best HP Stand Up Booth 1994 Entropy 360 readings for top lamps: 5.0 solarmeter = 109 6.0 solarmeter = 1.36 7.0 solarmeter = 21.1 No pictures, just a notebook full of meter readings on tons of lamps over the years.

15th August 2007, 01:02 PM	#94 (permalink)
solarmeter® UV Geek Squad Join Date: Nov 2004 Posts: 4,059	Re: Who makes the best HP Stand Up Booth Not bad! Not bad at all. Plenty of UVA. 1.25% UVB 11.4 minutes to 4 MEDs Te

15th August 2007, 06:52 PM	#96 (permalink)
solarmeter® UV Geek Squad Join Date: Nov 2004 Posts: 4,059	Re: Who makes the best HP Stand Up Booth I don't think that would cook a deer © any more faster than a 636 or whatever else have you.... except maybe an original BlackSun HP. Certainly not a boat anchor ® imo. © Deer Cooker - copyright David R Unvert circa 2002. ® Boat Anchor - registered trademark of Brian Oshman circa 2003.

15th August 2007, 07:08 PM	#97 (permalink)
Din Moderator Join Date: Feb 2005 Posts: 11,702	Re: Who makes the best HP Stand Up Booth Hence™! __________________ Dean Mandos USA: (309) CHRONOS \| (309) 247.6667 Canada: (416) 669.0031 \| info@chronosmarketing.com www.ChronosMarketing.com

15th August 2007, 07:31 PM	#98 (permalink)
solarmeter® UV Geek Squad Join Date: Nov 2004 Posts: 4,059	Re: Who makes the best HP Stand Up Booth ™ Hence - unregistered trademark of Din? Or who?

27th February 2008, 01:07 PM	#100 (permalink)
tanmeperfect Rookie Join Date: Feb 2008 Posts: 6	Re: Who makes the best HP Stand Up Booth saturn is the best by far

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode