636 Up and Running - TanToday - Helping Salon Owners, One At A Time, Since 2000!

Millhouse · 4th February 2005, 06:43 PM

We received our 636 a couple of weeks ago. After minor troubles with a circuit board, which was quickly corrected by Miracle Sun, the unit is performing very well.

The bed is running on setting 3 and on the 380VAC tap. I am getting 120-135 mW/cm2 on a 5.0 and 1.3 on a 6.0. Customer are very happy, which means owner is very happy. The unit does get extremely warm, particularly in the groin area. Those lamps are turned down to setting 1, but it still is hot there.

Thanks to Al, Brian, Randy, and Pete.

4th February 2005, 06:43 PM	#1 (permalink)
Millhouse Rookie Join Date: Nov 2004 Posts: 29	636 Up and Running We received our 636 a couple of weeks ago. After minor troubles with a circuit board, which was quickly corrected by Miracle Sun, the unit is performing very well. The bed is running on setting 3 and on the 380VAC tap. I am getting 120-135 mW/cm2 on a 5.0 and 1.3 on a 6.0. Customer are very happy, which means owner is very happy. The unit does get extremely warm, particularly in the groin area. Those lamps are turned down to setting 1, but it still is hot there. Thanks to Al, Brian, Randy, and Pete.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode