![]() | Network Sites: LOOKING FIT National Tanning Training Institute ![]() ![]() ![]() |
| |||||||
| Visit Our Sponsors! |
| High Pressure High Pressure Beds and Verticals spoken here. Post your questions and thoughts . |
![]() |
| | LinkBack | Thread Tools | Display Modes |
| | #2 (permalink) |
| Moderator Join Date: Oct 2004 Location: Neverland Posts: 1,944 | What's the session time on the bed ??? If it's a 12 min session, I could suggest the new Voltarc PWR 15 or the PWR 12 lamp for the application. both are made with an RDC connection. I'm presently running PWR15 non-reflected in a hybrid bed, and it is actually a little bit TOO strong, and should be cut back to a 12 min session time for the correct mix with the HP canopy. I have the PWR12 in the canopy of another bed, and are very compatable with the 9K90's in the bench, but the 9K's aren't available with 73-RDC setup to my understanding, shame as the Sig VHOR/HP lamp would probably be great for your application. |
| | |
| | #5 (permalink) |
| Moderator Join Date: Oct 2004 Location: Neverland Posts: 1,944 | get the website updated, John ![]() www.uriworld.com in a 160 vho application, what would you suggest for the bench on a hybrid ? running 15 minute session times |
| | |
| | #6 (permalink) |
| Hall of Famer Join Date: Nov 2004 Location: Cleveland Posts: 1,614 | That's a tough one, alot of times the bench lamps on a Combi bed will have too much UVB, causing "red bums". New Technology makes a lamp called the Phase Soft Sun FR73/RDC 160W (part# 204101) -Not sure they have them in the US, but it would be ideal for a combi unit at 15 minutes , 1.5% UVB with a nice amount of UVA. You could also consider a non-reflector lamp with a UVB of around 3-3.6%, that would take care of any heat issues in the bench. Really a hard choice on Combi beds! __________________ |
| | |
![]() |
| Thread Tools | |
| Display Modes | |
| |