Sucks Thread about MAGIC was locked

[Jones]

There was a container.
And I have bought from more than 7...apparently I get better service.

[MARVIN]

I said I have dealt with over 7 manufacters. Well your obviously bitching about service on here so you must not be getting better service?(ACCORDING TO YOU) I have seen over a 100 units installed in a week in 3 location we needed containers on site. Point is your analogy of them taking your garbage is absurd. Does your may tag man take their trash? The answer is no I just ordered 12 new washers and dryers we are responsible for the trash.

[MARVIN]

Jones I am only pointing out the fact that salon owners are responsible for garbage duty that was all.

[solarmeter®]

This is getting boring now.

[Jones]

Actually yes they do take the trash...I purchased a new washer and dryer about 6 months ago...and yes they did remove packing materials

[sparky]

come on already. answer questions regarding the bed, and proper installation to get it working already.

Sure, when I bought a W/D from Lowes, they delivered in THEIR truck, with THEIR crew, and carted off trash.

When beds are delivered by Common Carrier, i.e. trucking company, the truck is long gone, and the installed is left with his Ford Mustang, or Mazda Miata, to take tools home with.

They have, though, been willing and able to stack trash by the dumpsters for removal.

P.S. Still no answers to any of my previous questions Sheri .......

and I was one of the first containers installations so many many years ago with this bed, so .......................

been there, done that, and service and tech support has been impecable.

[Jones]

email your phone number and I will call you.

They brought the truck...left with the truck...it wasn't a common carrier...I wish it had been, atleast it would have gotten here on the correct day so I could have used the fork lift to take it off.

[BIG AL]

Any more info about the problem? Did we find out what was causing everything. Don't just leave us hanging.

[Jones]

Same problem(s) different day.

[solarmeter®]

Your new "tool" should arrive today.

[springboktanning]

havent been on the site for days since early this morning;have you figured out the problems shari or are you going in circles

[solarmeter®]

This subject has taken a bit of a different twist now.

Shari has her 7.0 meter today and took some readings along with her 5.0 at setting # 4:


Canopy (closed):
5.0: 117.0
7.0: 19.0

Bench:
5.0: 63.4
7.0: 11.3

Bottom line:
Her 5.0 output is less than Bob's and Brian's... upper and lower.
Her 7.0 readings are higher than Bob's and Brians.

So - The filter glass (Mug-6) is certainly working for UVB transmission. She could turn the setting down to 3 or 2 and get ~17.5 MED/hr same as Bob and Brian. But the 5.0 UVA would then fall back near 100... wheras 130 is more optimal. On max setting 8 the 5.0 doesn't go up past 123.

She considers the IR heat to be more than wanted on setting 4. And the "sideways" tanning results are minimal or "stripes" she says. I asked her to take sideways readings left and right at body position to see if there is a big difference or not.

Any ideas you 636 experts??? She would like to boost her 5.0 output about 10% and reduce her 7.0 output about 10% at the same time. I would suggest thicker clear glass and higher setting... but I'm not a bed tech.

[Jones]

Just a couple of corrections...the 5.0 reading on 8 is 127-128 at highest numbers. The ir is close to unbearable in certain lamps causing complications. My thoughts, as expressed to the company, the glass application is wrong...something is wrong.

[sparky]

two questions.

1. ) What is the exact thickness of the clear glass installed?

2.) Are the angle adjustment brackets installed on the two outer canopy columns?

[Jones]

Busy right now ...will measure soon.
Where are the brackets located...? Do i remove outer skin?

[Miraclesun]

Shari, did you call Patryk? Have him send the installer back out, and then pay him what you guys agree to. The only other option is to hire another tech, and pay him directly to trouble shoot your problem. But it sounds like someone needs to be on site.

Al

[springboktanning]

Shari i had the similar not performing as was supposed to issues on both of my brand new sunsport 2021 i purchased in 2003, and after 3 years of excuses and theres nothing wrong with the beds,and not worrying about my beds i had to pay 5k to get the beds close to what they were supposed to be at purchase, and they still have issues which they dont care about . i never brought it online so maybe you gonna get some action. i would if i was the importer or distributor

[TonyG]

Originally Posted by springboktanning2

Shari i had the similar not performing as was supposed to issues on both of my brand new sunsport 2021 i purchased in 2003, and after 3 years of excuses and theres nothing wrong with the beds,and not worrying about my beds i had to pay 5k to get the beds close to what they were supposed to be at purchase, and they still have issues which they dont care about . i never brought it online so maybe you gonna get some action. i would if i was the importer or distributor

Now it all makes sense...I was wondering why you kept bumping this thread!!!

[solarmeter®]

I figured that out weeks ago. She has an agenda. Obvious.

Shari just keeps ignoring her... so she started new threads here and there about what is the best HP bed (meaning anything other than Sun Italia or Miracle Sun stuff).

[TonyG]

Originally Posted by solarmeter®

I figured that out weeks ago. She has an agenda. Obvious.

Well arent you smart. Your parents must be very proud of you