First Leonardo in CANADA!!!

[Island Cove]

Natureboy, if you still have those pictures that i sent you last year with the mastersun that i put a sheet of plywood to represent your room size , go have a look again, keep in mind, that Mastersun is 67 inches wide, thats from the very back of the unit to the very end of the step. so look at the space between the bottom edge of the step and the plywood,(exposed floor) take out an inch and see if it will fit in your rooms.

[Natureboy]

Can't remember if I saved those pictures. But I remember is was not too bad and that was at 67 inches. So if this is 63 except the braces come out 66, should be good.

[solarmeter®]

Where's the beef - er - meter pics?

Quarters and rubber bands optional...

[W8INLINE]

Originally Posted by solarmeter®

Where's the beef - er - meter pics?

Quarters and rubber bands optional...

Steve....my meters don't read that high....that's why on another thread I was asking if there are meters that go higher.... jk

[solarmeter®]

What! Over 199.9 at body (belly button) position?

Surely you jest...

[Drew]

I have seen new Saturns in the 200's at body position with new glass and lamps...High 300's at the glass and 400's at the facial glass.

[BIG AL]

When I changed out the lamps in the Magic, the facial lamps were
the Supra lamps. I had them set to level 3 and they pegged the meter over 200. I had to turn it down to level 1 and they were still at 157. I just stand the meter up on the acrylic so at the body level, it was higher.

[navigatin1]

Looks like the thing took a little beatin on the way in?

[W8INLINE]

yes....actually those are my fault... but since it's mentioned... take note Al...

exactly where navigatin's arrows point is where the acrylic rests. the paint on that support WILL come off after a few uses and it will smudge the acrylic. I will be going to home depot and trying to find a foam type tape to put in those areas to prevent that from happening....

[Toronto]

Antother cute "LITTLE" 360 HP Bed. First a King then a Leonardo.
Do you Greeks have an aversion to buying something big or full sized?

[navigatin1]

Grab some of that door edge guard stuff. You can get it at any auto store and it comes in different colors. It has a little bit of sticky stuff to keep it on the metal, and it can be bent to round corners.

[solarmeter®]

TORONTO comes out of hiding. Jeepers.

[BIG AL]

Originally Posted by navigatin1

Grab some of that door edge guard stuff. You can get it at any auto store and it comes in different colors. It has a little bit of sticky stuff to keep it on the metal, and it can be bent to round corners.

It will work well. Puretan used to use it between the braces and the acrylic and I never had an acrylic damaged from the brace.

[W8INLINE]

Originally Posted by Toronto

Antother cute "LITTLE" 360 HP Bed. First a King then a Leonardo.
Do you Greeks have an aversion to buying something big or full sized?

its made in italy...


do you italians MAKE something big or full sized other than women?....or is that hairy...

[Toronto]

I'll show you something Italian that is big and full sized that will make you cry!

Like a baby's arm holding an apple.

Congrats on the new bed.

[Din]

Wow, Toronto is back.....is this your first shift of the year at the salon?

[Toronto]

Din get real it's Jan 23.....More likely to be my last shift of the year then my first.

Hey to Solarmeter Steve.

[W8INLINE]

hahahaha....you italians and your "baby's arm holding an apple" designs... no wonder Tammy thinks of a hot dog everytime she looks at a leonardo...

come in and try it this weekend...

[Toronto]

Thanks for the offer but Tanning is bad for u, haven't you folks ever read the labels affixed to your beds?.

True Story. A couple of yrs ago I was talking to W8INLINE on the phone and had to ask him how to spell tanning. He couldn't believe I was serious. I'm going to guess I was hungover. It's probably a good guess.

[W8INLINE]

Steve....here are some readings with the meter about 4-5 inches up from the acrylic.