First Leonardo in CANADA!!!

[W8INLINE]

There James... see the columns? that's where the dividing wall was for the two 8x7 rooms....

[W8INLINE]

lots of room behind the unit too.... this is before the exhaust is installed





the length of this room now is 14 ft.... lots of room for the customer... I hate the look of the 2 doors but of well...

[solarmeter®]

Ooooooh... what a tasty hot dog!

Now stick your meters in there and post a pic...

Old non-mug-6 Magic by Sparky - circa 5 years ago:

[solarmeter®]

5.0 Meter: Total UV: 162.5 mW/cm²
6.0 Meter: UVB: 1.29 mW/cm² (0.8%)
7.0 Meter: MED/hr: 13.4 (17.9 min to 4 MED)

Newer Magics are more "hot" - but this one was pretty "traditional".

[northtanman]

Beautiful bed for sure, but i think you should center it in the room and put in a double doorway...putting it on the angle makes it look too cramped...get rid of the single doors...you may even have a little room to put in a wall and make a small store room as you don't need the 14'. It needs double doors so when not in use, you can show it off!! I do like the poster at the end

[W8INLINE]

You like the bed????? doesn't it look like a hot dog to you???????

Anyways....the door is pretty big...36" so the bed shows off nicely when you walk down the hallway...but I do agree double doors would be much nicer.....our sunsport platinum and king in the front of the salon have that double door effect....these rooms were never suppposed to have HP's in there so they were not meant to display anything special....

The bed is positioned like that because of the electrical outlet and because the 15" exhaust will not interfere going up and out the side of the building.

the near future will tell if it's worth it for me to spend on construction for esthetics fo the room or not...

I do like the poster at the end

hey.....in europe all tanning ads are like softcore porn....italian bed...italian posters.... a little ass never hurt anyone....

[northtanman]

No, doesn't look like a hot dog! Beautiful bed!! You are the lucky one! Remodels are easy for me, as i do it all myself. Right now, i'm adding a bigger bed and have to either take a big bed i already have out of a big room or make a big room out of 2 smaller similar to what you did, but i will pull out a entire wall like you did and also take out the whole wall in the hall and add in double doors...to really open it up. But like i said, its just a puzzle to me and simple to do. Wiring is about the only hassle, running all new pipe...to get to the room.
What is your mix of units? You mentioned the king and sunsport??

[lewdyju]

You lucky son of a .... When my salon grows up, hopefully in a few months.. I am so buying that bastard!

[Natureboy]

I think I have the first new 2008 Saturn and 2008 Magic for Canada. And if that Leonardo fits......

I still need exact width measurements.

[Din]

2008 Magic has already been installed here in T.O.....when we posted the pics. Not sure if you had yours already then? Are they running in your salon yet? Or are they for the new location?

We also had first Sunsport Platinum and first King.....

What's the next one coming out? will need another HP to go with the King now.

[phattmatt]

love that built in FAN

[Miraclesun]

The body blower is very powerful. Shouldn't sweat a drop, unless you adjust it to the low speed.

Al

[Din]

This is the newest tanning lotion we've added for our Leonardo tanners. They go hand in hand

Island Cove....we took your advice on the looks.....and rolled with it. We sell this bottle for $150

[W8INLINE]

What is your mix of units? You mentioned the king and sunsport??

That's just it....

the rest don't matter... I think I have some royal sun 32 lamp beds somewhere in the salon....they rarely get used...so I think they are still there....and I believe there are also some tanses 52 lamp VHR's which I will be selling...

You see....I am in a college town and all the students want the best for their money....they don't want to spend a lot...like $100 for a month unlimited and a bottle of lotion...they would rather use the high pressures and a lotion for like 3-4 times and for the same amount roughly get result but in luxury instead....

You see... I think I suck as a salesperson....so having the BEST seperates me fro everyone else....so the beds' pressence makes my life easier....don't you think?

ok....sarcasm aside....I have 2 base 32 lamp 100w beds, one starship suncapsule, replacing my tanses 52's with a couple of sungates hopefuly this year, and to top everithing off a sunsport and a leonardo. The King is at the other location....which I will be setting up in a similar way. In the future I will be getting rid of the 32 lamp base beds since out of roughly 100 sessions a day 2-3 are only done on them.


Oh....and for my next bed I think I should buy a mastersun....just to be on Tammies' good side.... see Rob?....leonardo thread and I'm pluggin the mastersun.....nice eh?

[W8INLINE]

Al....the blower on level 8 is frigin loud..... you're right though...it makes a huge difference. One thing I don't realy like is that after the session the fan kick in at full blast for 3 minutes.....I find it too loud for the customer while they are trying to get dressed.....but it's only a minor problem if that....

When I say the fan is loud....I don't think it's louder than say the fans on the magic, king, sunsport...but still....

[Miraclesun]

Do you think all eight levels are necessary to keep the client cool?
I agree, when set on the 8th level the velocity of the fan is loud and intense.

Al

P.S- Only 2 Leos's left until late March.

[Natureboy]

Originally Posted by Miraclesun

Do you think all eight levels are necessary to keep the client cool?
I agree, when set on the 8th level the velocity of the fan is loud and intense.

Al

P.S- Only 2 Leos's left until late March.

Well if someone gives me EXACT width measurement I will put down the deposit. My room is 7ft wide by 11ft. 3.5 tons of A/C going to room.

[Miraclesun]

It's 8' in length x 66" wide. The width would be my concern, depending where your door is located, if you can use pocket doors, or last choice swing the doors outward. Lay this foot print out, and see if your clients would have enough room to get into the unit. They could dress, and undress at the opposite end you put the bed, this is where the door should be.

[W8INLINE]

James....dunno if this helps but...

[Natureboy]

The door is at the far end, so that is not a concern. Those stands that come out 66 would only leave me 18 inches to get around the rest would be about 21 inches. I think it would work. Be a little tight to climb in, but not that bad unless you are 400 pounds.

For those that complain, too bad. I would be able to run it every 20 minutes instead of every 40 now. That is doubling the sessions. Well worth it.