Help with Matrix - TanToday - Helping Salon Owners, One At A Time, Since 2000!

glowgirl35 · 30th January 2008, 01:20 PM

Does anyone know what FLT2 means on the control panel??

Din · 30th January 2008, 01:30 PM

Filter #2 is loose? HP beds should have the safety switch if a glass brakes to stop the bed from running. That could be it.

Just guessing....but it makes sense. Until you get someone that knows for sure, worth looking at.

glowgirl35 · 30th January 2008, 01:35 PM

Thanks Din ,
I checked all the filters etc but still won't start. Weird! Checked fuses etc. Gotta go take it apart, uh-oh, I'm sure I will be emailing in a few cuz I screwed it up more!!

SBT 501 · 30th January 2008, 01:36 PM

call Tan america I believe they still offer support for this bed.

glowgirl35 · 30th January 2008, 02:03 PM

Thank you, yeah, before I screw it up more, that's probably what I should do, haha. Thanks for your help guys!!

UV MAN · 30th January 2008, 05:50 PM

You can jump a connector on the main circuit baord in the mean time. This will bypass the circuit so you can use the bed as there is not broken glass. I believe FLT2 is for the filter glass in the base of the bed. You just have a bad connection in one of the banks.

glowgirl35 · 31st January 2008, 10:22 AM

Thanks guys so much for all your help! ALL FIXED!!

Shane · 31st January 2008, 10:39 AM

So what was it, just incase someone else runs into this problem?

dbl-a · 31st January 2008, 11:26 AM

Ya what was it? What year is it and what lamps are you using? Sorry if I already spoke to you. A little out of it as I just got my appendix out. Need to order lamps Monday. Looked on your website. Do you own seveal locations? Are you running the Matrix at 14min as stated on the site?

glowgirl35 · 31st January 2008, 01:27 PM

Hey,
I was the filter glass, my guy changed a lamp and I don't exactly know what was done. Something was re-wired right. Nothing big though. Dbl-A, you haven't spoken to me yet. It is a 2005. Yes, we own 8 locations and yes, we run it at 14 mins. On my website, it doesn't show all our equipment. Every store carries different stuff. PM me if you have any other questions. Good luck with your recovery!!

30th January 2008, 01:20 PM	#1 (permalink)
glowgirl35 www.glowtanningcenter.com Join Date: Jan 2007 Location: MASS Posts: 369	Help with Matrix Does anyone know what FLT2 means on the control panel??

30th January 2008, 01:30 PM	#2 (permalink)
Din Smartass Canuck Moderator Join Date: Feb 2005 Location: Canada Posts: 9,090	Re: Help with Matrix Filter #2 is loose? HP beds should have the safety switch if a glass brakes to stop the bed from running. That could be it. Just guessing....but it makes sense. Until you get someone that knows for sure, worth looking at. __________________ www.ChronosMarketing.com ____________________________________________ The problem nowadays is stupidity. Why don't we just take the safety labels off everything and see what happens?

30th January 2008, 01:35 PM	#3 (permalink)
glowgirl35 www.glowtanningcenter.com Join Date: Jan 2007 Location: MASS Posts: 369	Re: Help with Matrix Thanks Din , I checked all the filters etc but still won't start. Weird! Checked fuses etc. Gotta go take it apart, uh-oh, I'm sure I will be emailing in a few cuz I screwed it up more!!

30th January 2008, 01:36 PM	#4 (permalink)
SBT 501 All Star Join Date: Dec 2004 Posts: 128	Re: Help with Matrix call Tan america I believe they still offer support for this bed.

30th January 2008, 02:03 PM	#5 (permalink)
glowgirl35 www.glowtanningcenter.com Join Date: Jan 2007 Location: MASS Posts: 369	Re: Help with Matrix Thank you, yeah, before I screw it up more, that's probably what I should do, haha. Thanks for your help guys!!

30th January 2008, 05:50 PM	#6 (permalink)
UV MAN All Star Join Date: Jun 2007 Location: Tan Town Posts: 61	Re: Help with Matrix You can jump a connector on the main circuit baord in the mean time. This will bypass the circuit so you can use the bed as there is not broken glass. I believe FLT2 is for the filter glass in the base of the bed. You just have a bad connection in one of the banks.

31st January 2008, 10:22 AM	#7 (permalink)
glowgirl35 www.glowtanningcenter.com Join Date: Jan 2007 Location: MASS Posts: 369	Re: Help with Matrix Thanks guys so much for all your help! ALL FIXED!!

31st January 2008, 10:39 AM	#8 (permalink)
Shane Moderator Join Date: Nov 2004 Location: Hurricane Alley Posts: 1,906	Re: Help with Matrix So what was it, just incase someone else runs into this problem? __________________ .

31st January 2008, 11:26 AM	#9 (permalink)
dbl-a Express Tan Join Date: Aug 2007 Location: MN Posts: 922	Re: Help with Matrix Ya what was it? What year is it and what lamps are you using? Sorry if I already spoke to you. A little out of it as I just got my appendix out. Need to order lamps Monday. Looked on your website. Do you own seveal locations? Are you running the Matrix at 14min as stated on the site? Last edited by dbl-a : 31st January 2008 at 11:30 AM. Reason: added ?s

31st January 2008, 01:27 PM	#10 (permalink)
glowgirl35 www.glowtanningcenter.com Join Date: Jan 2007 Location: MASS Posts: 369	Re: Help with Matrix Hey, I was the filter glass, my guy changed a lamp and I don't exactly know what was done. Something was re-wired right. Nothing big though. Dbl-A, you haven't spoken to me yet. It is a 2005. Yes, we own 8 locations and yes, we run it at 14 mins. On my website, it doesn't show all our equipment. Every store carries different stuff. PM me if you have any other questions. Good luck with your recovery!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode