Noise through speakers - Page 2 - TanToday - Helping Salon Owners, One At A Time, Since 2000!

EliteMike · 2nd March 2008, 06:18 PM

I think the amp is jacked up in the magic, it was fine for a few days, now it's extremely quiet. i have to crank up the input

EliteMike · 7th March 2008, 03:07 AM

One thing I just noticed today, when helga speaks, the cd input comes on no matter what the volume is set on. cd input is what I'm using for my input. Helga still sounds fine,.....as in not distorted, but I hear the cd input even if the source is set to none. is there some sort of relay in there that switches her voice on and should knock the source off until she's done?

EliteMike · 21st March 2008, 10:50 AM

Didn't someone mention that the voice can be completely turned off on the magic?? via dip switches?

EliteMike · 25th March 2008, 10:53 AM

Alright, I had it with this thing, I tell people to turn it up before they start the bed, what do they do, they turn it up while helga is talking. so they essentially did not turn up the volume just her god awful voice

BAD BAD BAD BAD design. The salon is the only one that should have control over the volume of her voice. Poor girl probably thinks I was yelling at her in the bed when I was trying to tell her how to increase volume.

Anyway to shut her off and still use the volume?

I guess the one thing I could do is turn off standby music they they are forced to increase or decrease volume
I see a dip to switch from matress to 360, but that's it

Jim Fisher · 25th March 2008, 11:39 AM

Mike
Read my first post. The magic should have a radio built into the machine. Go into settings and you will see the stero setting. You can disable it there. Call Brian at Miracle Sun if you cant figure it out

EliteMike · 25th March 2008, 12:24 PM

You can disable that, but the voice stays.

I want to still be able to use the built in amp for my input. I'm using the cd input on the bed

EliteMike · 12th April 2008, 10:18 AM

Well I finally got around to having brackets made to mount the speakers on the bed. I have them pointing down at about 30 degrees. They are mounted right above the facial cooling vents. Clarity in bed is amazing now.

2nd March 2008, 06:18 PM	#21 (permalink)
EliteMike Hall of Famer Join Date: May 2007 Location: D.C. Posts: 4,462	Re: Noise through speakers I think the amp is jacked up in the magic, it was fine for a few days, now it's extremely quiet. i have to crank up the input

7th March 2008, 03:07 AM	#22 (permalink)
EliteMike Hall of Famer Join Date: May 2007 Location: D.C. Posts: 4,462	Re: Noise through speakers One thing I just noticed today, when helga speaks, the cd input comes on no matter what the volume is set on. cd input is what I'm using for my input. Helga still sounds fine,.....as in not distorted, but I hear the cd input even if the source is set to none. is there some sort of relay in there that switches her voice on and should knock the source off until she's done?

21st March 2008, 10:50 AM	#23 (permalink)
EliteMike Hall of Famer Join Date: May 2007 Location: D.C. Posts: 4,462	Re: Noise through speakers Didn't someone mention that the voice can be completely turned off on the magic?? via dip switches?

25th March 2008, 10:53 AM	#24 (permalink)
EliteMike Hall of Famer Join Date: May 2007 Location: D.C. Posts: 4,462	Re: Noise through speakers Alright, I had it with this thing, I tell people to turn it up before they start the bed, what do they do, they turn it up while helga is talking. so they essentially did not turn up the volume just her god awful voice BAD BAD BAD BAD design. The salon is the only one that should have control over the volume of her voice. Poor girl probably thinks I was yelling at her in the bed when I was trying to tell her how to increase volume. Anyway to shut her off and still use the volume? I guess the one thing I could do is turn off standby music they they are forced to increase or decrease volume I see a dip to switch from matress to 360, but that's it Last edited by EliteMike : 25th March 2008 at 11:05 AM.

25th March 2008, 11:39 AM	#25 (permalink)
Jim Fisher Moderator Join Date: Oct 2004 Posts: 3,497	Re: Noise through speakers Mike Read my first post. The magic should have a radio built into the machine. Go into settings and you will see the stero setting. You can disable it there. Call Brian at Miracle Sun if you cant figure it out __________________

25th March 2008, 12:24 PM	#26 (permalink)
EliteMike Hall of Famer Join Date: May 2007 Location: D.C. Posts: 4,462	Re: Noise through speakers You can disable that, but the voice stays. I want to still be able to use the built in amp for my input. I'm using the cd input on the bed Last edited by EliteMike : 25th March 2008 at 12:37 PM.

12th April 2008, 10:18 AM	#27 (permalink)
EliteMike Hall of Famer Join Date: May 2007 Location: D.C. Posts: 4,462	Re: Noise through speakers Well I finally got around to having brackets made to mount the speakers on the bed. I have them pointing down at about 30 degrees. They are mounted right above the facial cooling vents. Clarity in bed is amazing now.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode