Network Sites: LOOKING FIT National Tanning Training Institute
| Network Sites: LOOKING FIT National Tanning Training Institute |
| |||||||
| Visit Our Sponsors! |
| I NEED HELP Forum Problems with software, timers, build outs, etc. Come and post here. |
 |
| | LinkBack | Thread Tools | Display Modes |
2nd November 2005, 09:51 PM
| #1 (permalink) |
| All Star  Join Date: Sep 2005 Location: Oregon
Posts: 171
|  Buying New Timer - Use Helios 11, Need Advice I could really use some advice. I am getting ready to buy a new timer system and I will be conecting it to my helios version 11 that I recently upgraded to. I currently have 14 beds and all but 2 of them are Sun Ergoline beds. I use their CCS timers. I need to know if: * Can I use a CCS4 with Helios version 11 * Is there a way to prevent the computer from being bypassed to set the beds to avoid employee theft (employees setting beds for free for friends) * In an PC down emergency, is there a way to allow the employee to get a passcode from managment that would allow the beds to be set dirrectly form the timer and then the passcode reset until next time it is needed. Thanks in advance for your help.
__________________ __________________________ Thinking Heavenly Thoughts...  ~*~Angelique~*~ aka Jaime B. Salon Owner Since 1993, Retired, but not dead!  ______________________ |
|  |
| 3rd November 2005, 12:09 AM | #2 (permalink) |
| Isiah:45  Join Date: May 2005 Location: Ms. Posts: 201 | Timers I do know that the T-max has all these things you are looking for--exactly how to set these up,I'm not sure ,but ADI can answer all your questions. You can cut and paste your post in the T-Max,Tantime,& FST Timer Help Forum located below this forum....Good Luck!! Just looked....it is in a (sub-forum) of this forum..!! RR@TT Last edited by RR@TT : 3rd November 2005 at 12:30 AM. Reason: addition |
| | |
| 3rd November 2005, 10:35 AM | #4 (permalink) |
| All Star Join Date: Nov 2004 Location: Branson, MO Posts: 146 | The CCS4 will work with Helios 11. The CCS4 has passwords that you can change that allow you to keep your employees from starting sessions manually without knowing the password. If your computer crashes, you can enter that password to start sessions. Once your computer is working again, you can change the password. Kevin Barrett ADI Tech Support |
 | |
| 7th November 2005, 11:11 PM | #5 (permalink) |
| All Star Join Date: Sep 2005 Location: Oregon Posts: 171 |  Three Cheers for Kevin! =) w00t!!! Santa better be nice to you this year  Thank you!!! you just made my day! heck, ya made my year!  __________________ __________________________ Thinking Heavenly Thoughts... ~*~Angelique~*~ aka Jaime B. Salon Owner Since 1993, Retired, but not dead! ______________________ |
| | |
|
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
