T max pause

[steve dogg]

I just added two more T3A's. My existing timers pause the bed when the stop button is pressed and I set them up so the time also stops counting down . That was a long time ago and I can"t remember how I did that.
Can any one help jog my memory, my two additional timers keep counting the time away when the bed is paused.
System uses Helios and T Max Manager.

Thanks Steve

[tantechs]

If your using a Manager or Manager Pro

To get or change parameters, do the following:

1)

Press the BED NUMBER you want to check or change, followed by the ENTER key. The bed number and its status will appear.

2)

Press the CALL/MENU button.

3)

The following message will appear: SECURITY#. Enter the security number for level 3 followed by the ENTER key.

4)

The following message will appear: GET PARAMS?

6) Press the NEXT button.

7)

The following message will appear: SEND PARAMS? Press the ENTER button.

8)

The following message will appear: WHICH PARAMETER? Enter the parameter .
The parameter you want to change is parameter number 21

9)

The following message will appear: SEND WHAT DATA? Enter the value that you want to store in that timer followed by the ENTER button.
The value that you want to enter to stop the timer from counting down when paused is 1.
It will go back to send params, press enter again and the press next or previous to set the parameters for your second bed, and follow steps above.

Press CLEAR to exit.

If you have any problems, feel free to give me a call and I will walk you through it.

Tanning Techs
Jon Jones
816-694-7895
jjones1@swbell.net

[ADI Tech Support]

You have to set Parameter 21 on the T-Max 3As to a 1 to have the timers stop counting down time when a session is paused. To do this, do the following:

Remove power to the T-Max Manager.

Cycle power to the T-Max 3A.

On the 3A, press Start and Up together until the display reads a .1

Press the Up button until the display reads a 2.1.

Press the Start button. You will get a flashing 0.

Press the Up button to set it to a .1.

Press the Start button. You will get a 2.1.

Press both the Up and Down buttons together unil the period goes away.

When you have done both T-Max 3As, re-apply power to the T-Max Manager.

Kevin Barrett
ADI Tech Support

Originally Posted by steve dogg

I just added two more T3A's. My existing timers pause the bed when the stop button is pressed and I set them up so the time also stops counting down . That was a long time ago and I can"t remember how I did that.
Can any one help jog my memory, my two additional timers keep counting the time away when the bed is paused.
System uses Helios and T Max Manager.

Thanks Steve

[ADI Tech Support]

For those reading who might be confused as to the two ways to fix this problem, some clarification.

Jons instructions are correct. He chose to tell how to enable that parameter from the T-Max Manager/Pro.

I chose to tell how to do it from the timer (for no real reason. It's just how I thought to do it: .

I just wanted to clear that up.

Kevin Barrett
ADI Tech Support

[steve dogg]

Thank you for the quick response. Works great, nice to have straight forward help when needed
Thanks again, Steve