Fst 600 - TanToday - Helping Salon Owners, One At A Time, Since 2000!

DarkStar · 30th March 2007, 03:27 AM

Hi Guys
I am trying to hook up a FST 600 system to 3 beds for a friend.
I have 1 machine communicating and working. the other 2 are getting the signal but not starting the beds. if i jump the cable from the bed the machine starts.

I have changed cables and room switches but still no go.
the cables are standard phone cables that i was told would work.

Look forward to your help

Phil..

Brian Oshman · 30th March 2007, 08:36 AM

Do the switchplates you have use a relay or a triac?

If it is a triac, they only trigger AC relay coils so you will need to wire in a AC relay in between the bed and wall switch.

certan · 30th March 2007, 04:33 PM

Make sure your useing a 4 conductor reverse wire phone line..

See diagram at www.fstcompany.com

DarkStar · 30th March 2007, 05:47 PM

Quote:

Originally Posted by Brian Oshman

Do the switchplates you have use a relay or a triac?

If it is a triac, they only trigger AC relay coils so you will need to wire in a AC relay in between the bed and wall switch.

Brian, the switch plates have a relay

Glowtanning530 · 5th April 2007, 05:46 PM

Would those beds not working be Sundash or Ergoline?
I found out the hard way they're not compatable.

30th March 2007, 03:27 AM	#1 (permalink)
DarkStar "Perfect People" Join Date: May 2005 Location: Gold Coast - AU Posts: 210	Fst 600 Hi Guys I am trying to hook up a FST 600 system to 3 beds for a friend. I have 1 machine communicating and working. the other 2 are getting the signal but not starting the beds. if i jump the cable from the bed the machine starts. I have changed cables and room switches but still no go. the cables are standard phone cables that i was told would work. Look forward to your help Phil.. __________________

30th March 2007, 08:36 AM	#2 (permalink)
Brian Oshman Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 6,891	Re: Fst 600 Do the switchplates you have use a relay or a triac? If it is a triac, they only trigger AC relay coils so you will need to wire in a AC relay in between the bed and wall switch. __________________ Three can keep a secret if two are dead.

30th March 2007, 04:33 PM	#3 (permalink)
certan Veteran Join Date: May 2005 Location: Texas Posts: 481	Re: Fst 600 Make sure your useing a 4 conductor reverse wire phone line.. See diagram at www.fstcompany.com

5th April 2007, 05:46 PM	#5 (permalink)
Glowtanning530 Hall of Famer Join Date: Aug 2006 Location: Northern CA Posts: 3,084	Re: Fst 600 Would those beds not working be Sundash or Ergoline? I found out the hard way they're not compatable. __________________ www.myspace.com/glowtanningco www.glowtanningco.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode