Mystic Tan issue - TanToday - Helping Salon Owners, One At A Time, Since 2000!

sunrise · 7th May 2008, 04:28 PM

greetings all, I just ran into yet another issue with my mystic booth. Last yr I had to replace the meter. and low and behold the meter crapped out on me again. I trouble shot 2 areas to try and fix the problem with no avail. Now they are telling me I have to replace the cylinders. Incidentally, my warranty was up 30 days ago. any insight?

Mojave Tan · 7th May 2008, 05:13 PM

Good luck! Replace what the tell you and get it up and running. They are money makers w/Mother's Day, Graduation and Memorial Weekend fast approaching.

cehlers · 10th May 2008, 08:24 AM

Yeah, we have had to replace the cylinders several times-all of them, pretty expensive, but there is a post on here with someone who sells meters/cylinders cheaper than Mystic Tan.

northtanman · 11th May 2008, 03:41 PM

Did'nt i pm you where to get new cylinders cheap? $20 to $30 range each

its been posted before.

Din · 11th May 2008, 04:00 PM

I believe Shane, one of TanToday moderators does repairs on the cylinders for Mystic. PM him for more details.

Brian Oshman · 11th May 2008, 06:08 PM

Yup,

PM Shane.

If you use the dark solution it will kill the meter cylinders faster. Machines that run clear always have less problems as I have found due to no particulates causing abrasion in the cyclinder walls but everyone wants that instant result so they use the dark and it just tears up the machines faster.

7th May 2008, 04:28 PM	#1 (permalink)
sunrise Rookie Join Date: May 2008 Location: Meriden Posts: 2	Mystic Tan issue greetings all, I just ran into yet another issue with my mystic booth. Last yr I had to replace the meter. and low and behold the meter crapped out on me again. I trouble shot 2 areas to try and fix the problem with no avail. Now they are telling me I have to replace the cylinders. Incidentally, my warranty was up 30 days ago. any insight?

7th May 2008, 05:13 PM	#2 (permalink)
Mojave Tan Mojave Tan Join Date: Jul 2007 Location: Natomas, CA Posts: 543	Re: Mystic Tan issue Good luck! Replace what the tell you and get it up and running. They are money makers w/Mother's Day, Graduation and Memorial Weekend fast approaching.

10th May 2008, 08:24 AM	#3 (permalink)
cehlers All Star Join Date: Aug 2007 Location: dubuque, iowa Posts: 89	Re: Mystic Tan issue Yeah, we have had to replace the cylinders several times-all of them, pretty expensive, but there is a post on here with someone who sells meters/cylinders cheaper than Mystic Tan.

11th May 2008, 03:41 PM	#4 (permalink)
northtanman Super Star Join Date: Sep 2006 Location: michigan Posts: 959	Re: Mystic Tan issue Did'nt i pm you where to get new cylinders cheap? $20 to $30 range each its been posted before.

11th May 2008, 04:00 PM	#5 (permalink)
Din Smartass Canuck Moderator Join Date: Feb 2005 Location: Canada Posts: 8,411	Re: Mystic Tan issue I believe Shane, one of TanToday moderators does repairs on the cylinders for Mystic. PM him for more details. __________________ www.ChronosMarketing.com ____________________________________________ SOME PEOPLE ARE LIKE SLINKIES. NOT REALLY GOOD FOR ANYTHING, BUT THEY BRING A SMILE TO YOUR FACE WHEN PUSHED DOWN THE STAIRS

11th May 2008, 06:08 PM	#6 (permalink)
Brian Oshman Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 5,928	Re: Mystic Tan issue Yup, PM Shane. If you use the dark solution it will kill the meter cylinders faster. Machines that run clear always have less problems as I have found due to no particulates causing abrasion in the cyclinder walls but everyone wants that instant result so they use the dark and it just tears up the machines faster. __________________ Three can keep a secret if two are dead.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode