Problem with my Prosun Bed - TanToday - Helping Salon Owners, One At A Time, Since 2000!

rak69 · 17th June 2008, 01:42 PM

My Prosun Sapphire just started today to kick off for and right back on. What might be causing this? It has done it twice so far today.

Brian Oshman · 17th June 2008, 04:23 PM

Timer connection, bad connection in bed, obstruction iexhaust, bad airflow switch, bad fan or fan capacitor, bad fan board. If the fan is stopping then that triggers the airflow switch to turn off the bed so it could be any one of the problems listed above.

George Sklenicka · 18th June 2008, 09:28 AM

Quote:

Originally Posted by rak69

My Prosun Sapphire just started today to kick off for and right back on. What might be causing this? It has done it twice so far today.

If you need parts or further tech support, please contact your local dealer, Tan & Health @ (800) 795-9520 or call us here at the factory and ask for customer service. (800) 874-2776.

crystalnc · 27th June 2008, 05:20 PM

most likely the timer wire is rubbing against the wall when the canopy goes up and down. Take the housing apart and secure the wires.

17th June 2008, 01:42 PM	#1 (permalink)
rak69 Rookie Join Date: Mar 2007 Location: pa Posts: 31	Problem with my Prosun Bed My Prosun Sapphire just started today to kick off for and right back on. What might be causing this? It has done it twice so far today. __________________ Thank you Randy K

17th June 2008, 04:23 PM	#2 (permalink)
Brian Oshman Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 6,486	Re: Problem with my Prosun Bed Timer connection, bad connection in bed, obstruction iexhaust, bad airflow switch, bad fan or fan capacitor, bad fan board. If the fan is stopping then that triggers the airflow switch to turn off the bed so it could be any one of the problems listed above. __________________ Three can keep a secret if two are dead.

27th June 2008, 05:20 PM	#4 (permalink)
crystalnc Rookie Join Date: Jul 2005 Location: winston salem Posts: 21	Re: Problem with my Prosun Bed most likely the timer wire is rubbing against the wall when the canopy goes up and down. Take the housing apart and secure the wires.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode