Problem with Tanses bed - TanToday - Helping Salon Owners, One At A Time, Since 2000!

dooskip · 19th July 2008, 01:45 PM

Hello. I have a problem with my tanses 52 bed. The problem is 3 lamps in a row, stay out until 5-7 mins into a session. At that point they are not lighting up completely, they go on in a blue hue. It's not the lamps, bc we've switched the lamps around & they light up fine in a different location, & its not the starters because we've switched them around as well.
Hope you can help. Thanks

Brian Oshman · 19th July 2008, 08:55 PM

Could be a bad lampholder.

dooskip · 20th July 2008, 10:48 AM

We don't believe it's that bc it's 3 lamps in a row. Could there be anything else as the problem?

Brian Oshman · 20th July 2008, 11:09 AM

The power daisychains through the lampholders so check there first. A bad one will knock out the rest down line.

dooskip · 20th July 2008, 05:18 PM

How do I figure that out? What does the daisychain look like?

Brian Oshman · 20th July 2008, 06:28 PM

Here is a generic diagram.

Check ballast connections too as they also daisychain.

dooskip · 20th July 2008, 07:54 PM

Thank you.

19th July 2008, 01:45 PM	#1 (permalink)
dooskip Rookie Join Date: Aug 2007 Location: NJ Posts: 30	Problem with Tanses bed Hello. I have a problem with my tanses 52 bed. The problem is 3 lamps in a row, stay out until 5-7 mins into a session. At that point they are not lighting up completely, they go on in a blue hue. It's not the lamps, bc we've switched the lamps around & they light up fine in a different location, & its not the starters because we've switched them around as well. Hope you can help. Thanks __________________ "Live today to the fullest because tomorrow is not promised"

19th July 2008, 08:55 PM	#2 (permalink)
Brian Oshman Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 6,053	Re: Problem with Tanses bed Could be a bad lampholder. __________________ Three can keep a secret if two are dead.

20th July 2008, 10:48 AM	#3 (permalink)
dooskip Rookie Join Date: Aug 2007 Location: NJ Posts: 30	Re: Problem with Tanses bed We don't believe it's that bc it's 3 lamps in a row. Could there be anything else as the problem? __________________ "Live today to the fullest because tomorrow is not promised"

20th July 2008, 11:09 AM	#4 (permalink)
Brian Oshman Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 6,053	Re: Problem with Tanses bed The power daisychains through the lampholders so check there first. A bad one will knock out the rest down line. __________________ Three can keep a secret if two are dead.

20th July 2008, 05:18 PM	#5 (permalink)
dooskip Rookie Join Date: Aug 2007 Location: NJ Posts: 30	Re: Problem with Tanses bed How do I figure that out? What does the daisychain look like? __________________ "Live today to the fullest because tomorrow is not promised"

20th July 2008, 06:28 PM	#6 (permalink)
Brian Oshman Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 6,053	Re: Problem with Tanses bed Here is a generic diagram. Check ballast connections too as they also daisychain. __________________ Three can keep a secret if two are dead.

20th July 2008, 07:54 PM	#7 (permalink)
dooskip Rookie Join Date: Aug 2007 Location: NJ Posts: 30	Re: Problem with Tanses bed Thank you. __________________ "Live today to the fullest because tomorrow is not promised"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode