Sundash 332 Pro-1 fans?

[dbl-a]

Should the fans on the bed run after thesession for a cool down? Mine is just shutting off when time is up. Also, anyone have complaints about the facial being too hot?

[Parrot Head]

Yep.

[dbl-a]

Yep what?

[engfant]

They should be a setting to have the fans run for a few min after each session. It's either built into the timer or a setting on the fan relay or both or neither.

[kpowr82]

^^ Yup, if the fans were meant to run after the session for a cool down and they didn't, the bed wouldn't start. Unless it's a used bed and the cool down feature is being bypassed (bypassed relay). The only reason anyone would do this is if the relay went bad and they didn't want to replace it. Although if that happened, anyone with any brains would rig it so the fans stayed on ALL the time instead of not at all.

Is the bed used? Sorry, this most likely was no help at all, but maybe you can start with the fan relays.

[Parrot Head]

I have all my Ergo/Soltron/Sporterrado/Sun capsule equipment set to run a cool down cycle of at least 3 minutes after lamps shut off. Because my N'joy hp gets so hot after a 26 minute session, I run that at a 4 minute cool down. The cycle parameters are set in the bed timers.

[dbl-a]

Anyone know the parameters for setting a cool down?

[Parrot Head]

Parameter 13 in the t-max 3-A.

[dbl-a]

Thank you sir!