Moving My Salon - TanToday

Aphrodite · 29th October 2005, 05:10 PM

I'm going to be building a new place for my business, do you have any suggestions on where I might get a good design layout for a 20 plus bed salon. This is stand alone building. I'm just looking for a great floor plan.

Thank you,
John
escapetanningspa@yahoo.com

Pink · 30th October 2005, 09:50 AM

Your architect

pbbv5130 · 31st October 2005, 09:22 AM

I'll sell you mine for $ 25,000

Dmoore · 1st November 2005, 10:13 PM

how big is your space? I can send you some pics of stores and different layouts.

Aphrodite · 2nd November 2005, 02:33 AM

My space is 40' wide and 48' deep with the door in the front center and I have no restrictions since this is a new center. My direct e-mail is escapetanningspa@yahoo.com
John

Sarge · 8th November 2005, 05:18 PM

This will be tuff to do a 20 bed salon with these dimensions. We just did a 15 unit salon that was 1885 square feet and things are tight.

Alan @ TanToday · 8th November 2005, 11:26 PM

2 words - Stand Ups!

Aphrodite · 9th November 2005, 05:47 AM

Sarge I have realized I'm only going to get 14 to 15 units now. do you have a lay out of your salon?

Sarge · 9th November 2005, 08:23 AM

My final prints are too large to fax, I do have a smaller on with writing on it the was a ruff draft send me a msg with your fax and I can fax it to you.

Alan @ TanToday · 9th November 2005, 09:55 AM

Aphrodite,
Wont the company you originally purchased the beds from help you with layout plans? Or better yet, the contractor that is doing the build out on the new loco.

29th October 2005, 05:10 PM	#1 (permalink)
Aphrodite Rookie Join Date: Jul 2005 Posts: 4	Moving My Salon I'm going to be building a new place for my business, do you have any suggestions on where I might get a good design layout for a 20 plus bed salon. This is stand alone building. I'm just looking for a great floor plan. Thank you, John escapetanningspa@yahoo.com

8th November 2005, 11:26 PM	#7 (permalink)
Alan @ TanToday Checks and Balances Join Date: Mar 2005 Posts: 6,158	2 words - Stand Ups! __________________ Alan "America is too great for small dreams" - Ronald Reagan

9th November 2005, 09:55 AM	#10 (permalink)
Alan @ TanToday Checks and Balances Join Date: Mar 2005 Posts: 6,158	Aphrodite, Wont the company you originally purchased the beds from help you with layout plans? Or better yet, the contractor that is doing the build out on the new loco. __________________ Alan "America is too great for small dreams" - Ronald Reagan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

30th October 2005, 09:50 AM	#2 (permalink)
Pink Princess Pink Join Date: May 2005 Posts: 792	Your architect

31st October 2005, 09:22 AM	#3 (permalink)
pbbv5130 All Star Join Date: Jul 2005 Posts: 84	I'll sell you mine for $ 25,000

1st November 2005, 10:13 PM	#4 (permalink)
Dmoore Member Join Date: Aug 2005 Posts: 28	how big is your space? I can send you some pics of stores and different layouts.

2nd November 2005, 02:33 AM	#5 (permalink)
Aphrodite Rookie Join Date: Jul 2005 Posts: 4	My space is 40' wide and 48' deep with the door in the front center and I have no restrictions since this is a new center. My direct e-mail is escapetanningspa@yahoo.com John

8th November 2005, 05:18 PM	#6 (permalink)
Sarge All Star Join Date: Oct 2005 Posts: 111	This will be tuff to do a 20 bed salon with these dimensions. We just did a 15 unit salon that was 1885 square feet and things are tight.

9th November 2005, 05:47 AM	#8 (permalink)
Aphrodite Rookie Join Date: Jul 2005 Posts: 4	Sarge I have realized I'm only going to get 14 to 15 units now. do you have a lay out of your salon?

9th November 2005, 08:23 AM	#9 (permalink)
Sarge All Star Join Date: Oct 2005 Posts: 111	My final prints are too large to fax, I do have a smaller on with writing on it the was a ruff draft send me a msg with your fax and I can fax it to you.