Pano & Sun Fabrications - TanToday - Helping Salon Owners, One At A Time, Since 2000!

atouchofgold · 31st March 2006, 11:34 AM

Just need to let off alittle steam. Can't seem to get the service like I used to!

atouchofgold · 23rd June 2006, 10:14 AM

Here is an update on Pano & Sun Fabrications. If anyone else has had a problem with them, I would like to know. I am in the process of filing suit against him for breach of contract. Am also checking to see if I can file charges for grand theft.

tanman5x · 27th June 2006, 12:29 AM

Va salon here 2 locations i have had problems with Pano not delivering as promis and sending new beds with no bulbs. would like to see who is having smae problems I will be in Vegas to see him at the trade show

Porsha · 29th June 2006, 12:01 AM

I wonder about posts like this one. What is your issue with Pano?

MARVIN · 29th June 2006, 01:49 PM

I saw him complaing about Tan America also some place.

atouchofgold · 30th June 2006, 07:37 PM

My issue with Pano is that he has promised me things repeatedly and then not followed through. Have had an ongoing problem for 7 months, regarding beds that Pano owes me. Also he sent me one bed without lamps, and the timer is defective, it won't work with the T-max manager. I've had that bed for over 1 1/2 months trying to get him to come and replace the timer. He has promised to come many times, and still has not made it. I talked to him while he was on way to the Vegas show, has promised me again. We'll see.

In regards to Tan America, I had them install the new plug-in kit in one of the Matrix beds that I have. After installing the kit, it worked fine for about 2 weeks, then started to take up to 2 min for some of the lamps to light. Contacted Tan America and they asked me if I had one of the older Matrix beds. I told them yes (they should have known, I bought it from them). Then they inform me that I now need to install new ignitors, this means taking out the new kit to install the new ignitors and re-installing the lamps and reflectors. Did come to an agreement (I think) that they would take care of the labor portion in installing the ignitors. So I am ok with that.

As far as my dealings with Pano go, that waits to be seen.

Porsha · 1st July 2006, 09:20 PM

Do you want Tan America PL lamps, or ISO ?

Drew · 1st July 2006, 11:50 PM

You want the ISO lamps or better yet, the Radium lamps. But Tan America is PL'ing these horrible lamps for Matrix. STAY AWAY from them. They work worse than the old (USED) ISO lamps did you just took out.

Pano has business problems with beds. But he is fine for lamps.

31st March 2006, 11:34 AM	#1 (permalink)
atouchofgold All Star Join Date: May 2005 Location: Fresno, Ca Posts: 69	Pano & Sun Fabrications Just need to let off alittle steam. Can't seem to get the service like I used to! Last edited by atouchofgold : 1st April 2006 at 05:44 PM.

23rd June 2006, 10:14 AM	#2 (permalink)
atouchofgold All Star Join Date: May 2005 Location: Fresno, Ca Posts: 69	Here is an update on Pano & Sun Fabrications. If anyone else has had a problem with them, I would like to know. I am in the process of filing suit against him for breach of contract. Am also checking to see if I can file charges for grand theft. Last edited by atouchofgold : 23rd June 2006 at 09:56 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

27th June 2006, 12:29 AM	#3 (permalink)
tanman5x Rookie Join Date: Jun 2006 Location: martinsville Posts: 1	Va salon here 2 locations i have had problems with Pano not delivering as promis and sending new beds with no bulbs. would like to see who is having smae problems I will be in Vegas to see him at the trade show

29th June 2006, 12:01 AM	#4 (permalink)
Porsha All Star Join Date: Jun 2006 Location: Wherever I want Posts: 71	I wonder about posts like this one. What is your issue with Pano?

29th June 2006, 01:49 PM	#5 (permalink)
MARVIN Veteran Join Date: Jan 2006 Location: USA Posts: 372	I saw him complaing about Tan America also some place.

30th June 2006, 07:37 PM	#6 (permalink)
atouchofgold All Star Join Date: May 2005 Location: Fresno, Ca Posts: 69	My issue with Pano is that he has promised me things repeatedly and then not followed through. Have had an ongoing problem for 7 months, regarding beds that Pano owes me. Also he sent me one bed without lamps, and the timer is defective, it won't work with the T-max manager. I've had that bed for over 1 1/2 months trying to get him to come and replace the timer. He has promised to come many times, and still has not made it. I talked to him while he was on way to the Vegas show, has promised me again. We'll see. In regards to Tan America, I had them install the new plug-in kit in one of the Matrix beds that I have. After installing the kit, it worked fine for about 2 weeks, then started to take up to 2 min for some of the lamps to light. Contacted Tan America and they asked me if I had one of the older Matrix beds. I told them yes (they should have known, I bought it from them). Then they inform me that I now need to install new ignitors, this means taking out the new kit to install the new ignitors and re-installing the lamps and reflectors. Did come to an agreement (I think) that they would take care of the labor portion in installing the ignitors. So I am ok with that. As far as my dealings with Pano go, that waits to be seen.

1st July 2006, 09:20 PM	#7 (permalink)
Porsha All Star Join Date: Jun 2006 Location: Wherever I want Posts: 71	Do you want Tan America PL lamps, or ISO ?

1st July 2006, 11:50 PM	#8 (permalink)
Drew Hall of Famer Join Date: Nov 2004 Location: Ca Posts: 2,891	You want the ISO lamps or better yet, the Radium lamps. But Tan America is PL'ing these horrible lamps for Matrix. STAY AWAY from them. They work worse than the old (USED) ISO lamps did you just took out. Pano has business problems with beds. But he is fine for lamps.