The New Cleo Swift HP lamp - TanToday - Helping Salon Owners, One At A Time, Since 2000!

imported_Jim · 17th November 2004, 04:28 PM

The New Cleo Swift HP lamp is a High pressure spectrum in a low pressure lamp.

Upgrade your bed with just a lamp change

John · 17th November 2004, 04:43 PM

Cleo Swift HPA looks like it may be a very good lamp. As soon as I get some I'll test them.

Not sure if they are in stock yet!

Jim Fisher · 20th November 2004, 10:12 AM

sparky · 20th November 2004, 01:06 PM

I've had great results from both LSI and Swift in the past.

Presently running some 9K90's and was looking to the LSIversion for the next lamp change, after hearing good life outta them.

The Swift Version should be something to look at though.

Beat · 20th November 2004, 01:11 PM

Thanks Jim.....I wish read thole little words write on the brochure (tech spec.) instead see the pic, if you are able to do it it will be great!

actually I'm using mixing 9k90 and Philips Advantage in the same unit. I'm very happy with the results.

Vito

Jim Fisher · 20th November 2004, 02:37 PM

Comes in 100 and 160s reflctors and 100 non reflector bi pin style

Contact Matthijs by e mail at matthijs.glastra@philips.com for more info

Beat · 22nd November 2004, 04:18 AM

Thanks

cfindley · 22nd November 2004, 01:18 PM

The new voltarc ad says something like this, we use Tan America, i guess ill call them since they make them for TA!

17th November 2004, 04:28 PM	#1 (permalink)
imported_Jim Rookie Join Date: Oct 2004 Posts: 37	The New Cleo Swift HP lamp The New Cleo Swift HP lamp is a High pressure spectrum in a low pressure lamp. Upgrade your bed with just a lamp change

17th November 2004, 04:43 PM	#2 (permalink)
John Hall of Famer Join Date: Nov 2004 Location: Cleveland Posts: 1,610	Cleo Swift HPA looks like it may be a very good lamp. As soon as I get some I'll test them. Not sure if they are in stock yet! __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

20th November 2004, 10:12 AM	#3 (permalink)
Jim Fisher Moderator Join Date: Oct 2004 Posts: 3,497

20th November 2004, 01:06 PM	#4 (permalink)
sparky Moderator Join Date: Oct 2004 Location: Neverland Posts: 1,937	I've had great results from both LSI and Swift in the past. Presently running some 9K90's and was looking to the LSIversion for the next lamp change, after hearing good life outta them. The Swift Version should be something to look at though.

20th November 2004, 01:11 PM	#5 (permalink)
Beat All Star Join Date: Nov 2004 Location: Milan, Italy Posts: 199	Thanks Jim.....I wish read thole little words write on the brochure (tech spec.) instead see the pic, if you are able to do it it will be great! actually I'm using mixing 9k90 and Philips Advantage in the same unit. I'm very happy with the results. Vito

20th November 2004, 02:37 PM	#6 (permalink)
Jim Fisher Moderator Join Date: Oct 2004 Posts: 3,497	Comes in 100 and 160s reflctors and 100 non reflector bi pin style Contact Matthijs by e mail at matthijs.glastra@philips.com for more info

22nd November 2004, 04:18 AM	#7 (permalink)
Beat All Star Join Date: Nov 2004 Location: Milan, Italy Posts: 199	Thanks

22nd November 2004, 01:18 PM	#8 (permalink)
cfindley Super Star Join Date: Nov 2004 Location: texas Posts: 601	The new voltarc ad says something like this, we use Tan America, i guess ill call them since they make them for TA!