Setting individual room times

[imported_dbrock]

anyone know if i can set maximum session times in each room..

ex: room 1 -15min room2 - 15 min room 3 - 20 min room 4 - 10min

thanks in advance.

[ADI Tech Support]

The max times are controlled by the timers in the tanning rooms. You can not change these max times without changing the hardware, depending on the tanning timer you have in the room.

If you are using software to run your salon, you may be able to do it in the software (any time below the max time set on the timer in the tanning room). You an not exceed the max time that the timer is set to.

If you are using T-Max 3As, you can change the max time chip in the T-Max 3A to limit the max time on the timer in the timer. If you are using timers built into the tanning bed then you will have to get with the tanning bed manufacturer to see if the max times on the tanning bed can be changed.

Kevin Barrett
ADI Tech Support

[imported_dbrock]

How do I go about changing the chip in the timer. I have two in particular that I'd like to limit to 15 minutes.

thanks for the help.

[ADI Tech Support]

There is a chip on the back of the T-Max 3A. It is in a socket. Remove power from the timer, use a flat head screw driver to pry one end up and walk the chip up. Place the new chip in the same way.

Kevin Barrett
ADI Tech Support