1A's

[imported_Phiper]

Hey Kevin,
Can you put on your website (under manuals) the instructions for setting up a 1A timer? I know... "old technology", but hey these timers have been going GREAT for... it will be 10 years this March! I need to re-address a couple of timers.

Also, what is the rating on the contacts for a 3A?

Thanks.

[ADI Tech Support]

The ratings of the T-Max 3A Contacts are 240V at 5Amps (the same as the 1A).

To set the address on a T-Max 1A, do the following:

Remove power from your T-Max Manager.

Remove power from your T-Max 1A.

Press and hold the Start/Stop button on the T-Max 1A.

While holding the Start/Stop button apply power to the T-Max 1A. As soon as you see a number, period, number (ie. 1.2) release the button.

Press the Set button to set the address to the room number you want to set the T-Max 1A to. Remember that the period must NOT be flashing. A flashing period means the timer is over address 100.

Once the desired address is displayed, press the Start/Stop button on the T-Max 1A. The T-Max 1A will then show a 0.

Once you are done with all T-Max 1As, you can re-apply power to your T-Max Manager.

Kevin Barrett
ADI Tech Support