Programming t-max manager - TanToday - Helping Salon Owners, One At A Time, Since 2000!

imported_YatesGr · 26th February 2006, 03:24 PM

Can you program the T-Max manager or see the stored parameters (max bed number, etc.) without a key? A friend has a new t-max manager (without a key) he is trying to program but when he hits the start/stop buttons under displays 1 and 8, the display shows all dashes in 1-5 and displays 6-8 show zeros. He cannot change any of the parameters in 1-5. Our t-max manager has a key that needs to be turned to see these values. Can anyone help?

sparky · 26th February 2006, 03:28 PM

www.appdig.com will have manuals for all models of the T-Max Managers.

Not sure which model you are talking about. The newer models do not use a key, but also do not display only 8 beds at a time.

SUN KISSED BODIES · 11th July 2006, 09:17 PM

I Need Help With A Manager Pro. I Get It Used And Need The Codes To Make It Work.

SUN KISSED BODIES · 11th July 2006, 09:45 PM

How Do You Clear A Tmax Manager Pro Inorder To Get It To Scan For New Rooms.

Need Codes That Came In Manual And They Are Not On That Web Site.

888 Is Not The Code I Need

Security Codes?

FSTeri · 13th July 2006, 05:05 PM

The newer versions of the Manager have codes you must obtain from Applied Digital. 417 272 0761

If it is an older version, I've got the master password, I'll email it to you.

Call me if you get stuck.

Teri Stephens

1-800-325-3255

tantechs · 13th July 2006, 07:53 PM

999 is the code to get the manager plus/pro to re-scan for beds. or just unplug it and plug it back in.

FSTeri · 14th July 2006, 09:45 AM

I'm thinking that they might be needing the security code passwords for level 1, 2, or 3. The generic for level 1 is call/menu, 1111, enter. This should allow them to set them time, although if the previous owner had a different password, then there is a master password to reset them all to her preference.

Although its not a military-level secret (haha), I'd rather not give out the master password over email, but its in the manual in the back....or email me (terib@fstanning.com).

Teri

hgeorge · 23rd August 2006, 01:45 PM

I have never hooked up my Suntouch to the T-Max. Can anyone tell me what I need to do. IE: which plug, is there certain software to install or what?? Thanks

sparky · 23rd August 2006, 01:47 PM

there should be a Serial post on the Manager that you connect to the computer.

In SunTouch, Set the timer system to T-Max, and it should walk you through it.

been over 4 years since I ran that part anyway, but pretty straight-forward

hgeorge · 23rd August 2006, 02:08 PM

Thank you I'm going to give it a shot this afternoon. What is the adnet CD for?

sparky · 23rd August 2006, 02:32 PM

Adnet is a stand alone software program to run the Manager without other salon software such as SunTougch, Helios, etc.....

You CAN load it on to the computer, as it can help t-shoot any issues with software operations in the future, but you do NOT want to run both SunTouch and ADNET at the same time.

Make any sense ???

hgeorge · 23rd August 2006, 02:38 PM

Perfect sence ............ Thank you very much. I'll let ya know how I make out this afternoon.

26th February 2006, 03:24 PM	#1 (permalink)
imported_YatesGr Rookie Join Date: Nov 2004 Posts: 4	Programming t-max manager Can you program the T-Max manager or see the stored parameters (max bed number, etc.) without a key? A friend has a new t-max manager (without a key) he is trying to program but when he hits the start/stop buttons under displays 1 and 8, the display shows all dashes in 1-5 and displays 6-8 show zeros. He cannot change any of the parameters in 1-5. Our t-max manager has a key that needs to be turned to see these values. Can anyone help?

26th February 2006, 03:28 PM	#2 (permalink)
sparky Moderator Join Date: Oct 2004 Location: Neverland Posts: 1,944	Re: Programming t-max manager www.appdig.com will have manuals for all models of the T-Max Managers. Not sure which model you are talking about. The newer models do not use a key, but also do not display only 8 beds at a time. __________________ ......................Flashback 2001........................ "One of the 'ORIGINAL' TanToday Gang" Life is like a sled dog team...if you ain't the lead dog, the scenery never changes.

13th July 2006, 05:05 PM	#5 (permalink)
FSTeri Rookie Join Date: Jul 2006 Location: Tennessee Posts: 2	Codes The newer versions of the Manager have codes you must obtain from Applied Digital. 417 272 0761 If it is an older version, I've got the master password, I'll email it to you. Call me if you get stuck. Teri Stephens 1-800-325-3255

23rd August 2006, 01:45 PM	#8 (permalink)
hgeorge Rookie Join Date: Jul 2005 Location: Rhode Island Posts: 14	Hooking up T-Max to Suntouch Plus I have never hooked up my Suntouch to the T-Max. Can anyone tell me what I need to do. IE: which plug, is there certain software to install or what?? Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11th July 2006, 09:17 PM	#3 (permalink)
SUN KISSED BODIES Rookie Join Date: Jul 2006 Location: ATLANTA GA Posts: 2	I Need Help With A Manager Pro. I Get It Used And Need The Codes To Make It Work.

11th July 2006, 09:45 PM	#4 (permalink)
SUN KISSED BODIES Rookie Join Date: Jul 2006 Location: ATLANTA GA Posts: 2	How Do You Clear A Tmax Manager Pro Inorder To Get It To Scan For New Rooms. Need Codes That Came In Manual And They Are Not On That Web Site. 888 Is Not The Code I Need Security Codes?

13th July 2006, 07:53 PM	#6 (permalink)
tantechs All Star Join Date: Jun 2005 Location: Independence, Mo. Posts: 159	999 is the code to get the manager plus/pro to re-scan for beds. or just unplug it and plug it back in.

14th July 2006, 09:45 AM	#7 (permalink)
FSTeri Rookie Join Date: Jul 2006 Location: Tennessee Posts: 2	I'm thinking that they might be needing the security code passwords for level 1, 2, or 3. The generic for level 1 is call/menu, 1111, enter. This should allow them to set them time, although if the previous owner had a different password, then there is a master password to reset them all to her preference. Although its not a military-level secret (haha), I'd rather not give out the master password over email, but its in the manual in the back....or email me (terib@fstanning.com). Teri

23rd August 2006, 01:47 PM	#9 (permalink)
sparky Moderator Join Date: Oct 2004 Location: Neverland Posts: 1,944	there should be a Serial post on the Manager that you connect to the computer. In SunTouch, Set the timer system to T-Max, and it should walk you through it. been over 4 years since I ran that part anyway, but pretty straight-forward

23rd August 2006, 02:08 PM	#10 (permalink)
hgeorge Rookie Join Date: Jul 2005 Location: Rhode Island Posts: 14	Thank you I'm going to give it a shot this afternoon. What is the adnet CD for?

23rd August 2006, 02:32 PM	#11 (permalink)
sparky Moderator Join Date: Oct 2004 Location: Neverland Posts: 1,944	Adnet is a stand alone software program to run the Manager without other salon software such as SunTougch, Helios, etc..... You CAN load it on to the computer, as it can help t-shoot any issues with software operations in the future, but you do NOT want to run both SunTouch and ADNET at the same time. Make any sense ???

23rd August 2006, 02:38 PM	#12 (permalink)
hgeorge Rookie Join Date: Jul 2005 Location: Rhode Island Posts: 14	Perfect sence ............ Thank you very much. I'll let ya know how I make out this afternoon.