TMax 3A to SIP conversion - TanToday - Helping Salon Owners, One At A Time, Since 2000!

cabanaboy · 24th July 2006, 06:03 PM

I have an extra 20 minute 3A that I would like to convert to SIP to use with a CCS4. Is this as simple as replacing the communications chip with a SIP chip?

ADI Tech Support · 24th July 2006, 06:06 PM

You must replace the program chip, not the communications chip. But yes, it's pretty simple.

Kevin Barrett
ADI Tech Support

cabanaboy · 24th July 2006, 06:14 PM

Thanks Kevin,

Should I get the chip thru ADI or is it available thru my distributor?

ADI Tech Support · 24th July 2006, 06:30 PM

You will have to get it through one of our distributors.

Kevin Barrett
ADI Tech Support

24th July 2006, 06:03 PM	#1 (permalink)
cabanaboy Rookie Join Date: Jun 2006 Location: SouthEast Posts: 7	TMax 3A to SIP conversion I have an extra 20 minute 3A that I would like to convert to SIP to use with a CCS4. Is this as simple as replacing the communications chip with a SIP chip?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

24th July 2006, 06:06 PM	#2 (permalink)
ADI Tech Support All Star Join Date: Nov 2004 Location: Branson, MO Posts: 146	You must replace the program chip, not the communications chip. But yes, it's pretty simple. Kevin Barrett ADI Tech Support

24th July 2006, 06:14 PM	#3 (permalink)
cabanaboy Rookie Join Date: Jun 2006 Location: SouthEast Posts: 7	Thanks Kevin, Should I get the chip thru ADI or is it available thru my distributor?

24th July 2006, 06:30 PM	#4 (permalink)
ADI Tech Support All Star Join Date: Nov 2004 Location: Branson, MO Posts: 146	You will have to get it through one of our distributors. Kevin Barrett ADI Tech Support