Network Sites: LOOKING FIT National Tanning Training Institute
| Network Sites: LOOKING FIT National Tanning Training Institute |
| |||||||
| Visit Our Sponsors! |
| T Max ADI Forum All you want to know about T Max Timers |
 |
| | LinkBack | Thread Tools | Display Modes |
27th November 2006, 02:31 PM
| #1 (permalink) |
| Rookie Join Date: Nov 2006 Location: spain
Posts: 4
|  T-Max In-board Hello all. I have a sunbed without a T-Max system installed, it have a system called something like beckman gmbh. I want to know if i can intall a tmax board into my bed. I dont need the part that is installed on wall, only need board that is intalled into sunbed. I want to control my bed only with T-Max Manager. Is that posible please? Im from spain, here power supply is 220v 50Hz, is that a problem? Hope anyone can help me thanks, and sorry for my bad english. |
|  |
| 27th November 2006, 05:58 PM | #2 (permalink) |
| Off The Chain Moderator  Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 7,041 | Re: T-Max In-board Just use a wall mount T-max timer. The on board timers are made special for beds that have them. __________________      Three can keep a secret if two are dead.  |
 | |
| 28th November 2006, 05:34 AM | #3 (permalink) |
| Rookie Join Date: Nov 2006 Location: spain Posts: 4 | Re: T-Max In-board Thanks, but i dont want to put a timer on wall, i want to cotrol all beds with T-Max Manager. Now y buy my beds clean, without timer. I want to know if i can buy a board and install it into my bed. That is that im doing now with my beds, y my my bed clean and then i install a timer board into bed. |
| | |
| 28th November 2006, 09:16 AM | #4 (permalink) |
| Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 7,041 | Re: T-Max In-board The wall timer is controlled by the manager. When it is connected to the manager, it cannot be operated in the room. Only the start/stop function. __________________ Three can keep a secret if two are dead. |
| | |
| 28th November 2006, 11:52 AM | #5 (permalink) |
| Rookie Join Date: Nov 2006 Location: spain Posts: 4 | Re: T-Max In-board Oh thanks! And can i put the wal timer into my bed (because dont want that users see the timer) and program time and start it with my T-Max Manager?? Then i dont use a onboard timer but i get that i want, is that users dont see the timer and dont need to start em. Thank u very much for ask quick. |
| | |
| 28th November 2006, 12:16 PM | #6 (permalink) |
| Moderator  Join Date: Nov 2004 Location: Six degrees left of nowhere Posts: 5,065   | Re: T-Max In-board Just a question but why wouldnt you want them to see the time they are in for? And why wouldnt you want them to start the bed on their own? What if they are ready sooner than you decide to start it? |
| | |
| 28th November 2006, 12:31 PM | #7 (permalink) |
| Rookie Join Date: Nov 2006 Location: spain Posts: 4 | Re: T-Max In-board Because i want to change my old timer for TMax system. That system have an internal timer into bed, then i want to leave the work method as is now, only replace the system. For new installations i think that is better that user press start, but my client wants to continue working like now, that sunbed start a few minutes after activation. |
| | |
| 28th November 2006, 12:52 PM | #8 (permalink) |
| Moderator Join Date: Nov 2004 Location: Six degrees left of nowhere Posts: 5,065 | Re: T-Max In-board AHhhh, gotcha!  If you have an autostart thing with your current system. Tmax can do that too. You can still mount it to the wall so if they are so inclined to see how long they have, they can, but it can autostart after 3-10 min (whatever you choose) so if they dont want to press start, they dont have to. Just a thought.... |
| | |
|
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
