Cool Down - TanToday - Helping Salon Owners, One At A Time, Since 2000!

sunbug · 10th February 2007, 02:36 PM

Bed is set for 5 min. cool down...fan is shutting off after 6.5 minutes...is it t-max..if so what should I check...thanks

tantechs · 11th February 2007, 02:06 AM

What type of bed is it?????
If it has a T-Max timer on the wall, that doesnt control the bed cool down time. It is controlled by the bed, either a fan delay inside the bed somewhere, or controlled by the bed powerboard.

sunbug · 11th February 2007, 11:37 AM

It is a Big Bear with 3a timer on the wall and a manager with Suntouch

tantechs · 13th February 2007, 09:32 PM

It more than likely has a coold down fan timer relay mounted on top of one of the contactors. There is a dial on the top that you set the delay time with.
Call the manufacturer and see if they can help..

ADI Tech Support · 14th February 2007, 09:44 AM

Tan Techs is correct. A T-Max 3A does not control cool down on the tanning bed. This would be a function of a timer relay in the tanning bed.

Kevin Barrett
ADI Tech Support

sunbug · 14th February 2007, 10:04 AM

Thanks guys...checking that today

10th February 2007, 02:36 PM	#1 (permalink)
sunbug Rookie Join Date: May 2005 Location: New York Posts: 34	Cool Down Bed is set for 5 min. cool down...fan is shutting off after 6.5 minutes...is it t-max..if so what should I check...thanks

11th February 2007, 02:06 AM	#2 (permalink)
tantechs All Star Join Date: Jun 2005 Location: Independence, Mo. Posts: 159	Re: Cool Down What type of bed is it????? If it has a T-Max timer on the wall, that doesnt control the bed cool down time. It is controlled by the bed, either a fan delay inside the bed somewhere, or controlled by the bed powerboard.

11th February 2007, 11:37 AM	#3 (permalink)
sunbug Rookie Join Date: May 2005 Location: New York Posts: 34	Re: Cool Down It is a Big Bear with 3a timer on the wall and a manager with Suntouch

13th February 2007, 09:32 PM	#4 (permalink)
tantechs All Star Join Date: Jun 2005 Location: Independence, Mo. Posts: 159	Re: Cool Down It more than likely has a coold down fan timer relay mounted on top of one of the contactors. There is a dial on the top that you set the delay time with. Call the manufacturer and see if they can help..

14th February 2007, 09:44 AM	#5 (permalink)
ADI Tech Support All Star Join Date: Nov 2004 Location: Branson, MO Posts: 146	Re: Cool Down Tan Techs is correct. A T-Max 3A does not control cool down on the tanning bed. This would be a function of a timer relay in the tanning bed. Kevin Barrett ADI Tech Support

14th February 2007, 10:04 AM	#6 (permalink)
sunbug Rookie Join Date: May 2005 Location: New York Posts: 34	Re: Cool Down Thanks guys...checking that today

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode