Changing bed delay - TanToday - Helping Salon Owners, One At A Time, Since 2000!

bunz1969 · 16th February 2007, 12:03 PM

Ohhhh Kevinnnnn

I changed the delay to 5 minutes in Helios w/ no problem. But when we have to re-start a bed manually though the Manager Pro, it defaults to 3 minutes. I have tried several times to change the #3 Parameter through the MPro and it still defaults to 3 minutes.

I also tried to change it at the 3A, but when I push on the start/stop button and the up button at the same time, all it does is quickly beeps. The manual says that I should see .1 after 5-6 seconds, but .1 never shows up.

Any suggestions??

Thanks!
Amy

ADI Tech Support · 16th February 2007, 12:22 PM

OOOOhhhhhh Amy

You're not changing the delay in the right place.

On the manager pro, hit Call/Menu. The dispay will read Security/Call.

Press 3333 then enter. The display will read Get Params. Press Next.

The Display will read Send Params, press next.

The display will read Mgr Params. Press Enter.

The display will read Mgr delay time. Press 5 then Enter.

The display will read Mgr Start Mode. Press Clear.

You Managers delay will now be 5 minutes.

Kevin Barrett
ADI Tech Support

bunz1969 · 16th February 2007, 12:28 PM

Rock on!! It worked.

Apparently, I skipped that page while reading the User Guide.

16th February 2007, 12:03 PM	#1 (permalink)
bunz1969 All Star Join Date: May 2005 Location: at the salon - where else? Posts: 175	Changing bed delay Ohhhh Kevinnnnn I changed the delay to 5 minutes in Helios w/ no problem. But when we have to re-start a bed manually though the Manager Pro, it defaults to 3 minutes. I have tried several times to change the #3 Parameter through the MPro and it still defaults to 3 minutes. I also tried to change it at the 3A, but when I push on the start/stop button and the up button at the same time, all it does is quickly beeps. The manual says that I should see .1 after 5-6 seconds, but .1 never shows up. Any suggestions?? Thanks! Amy

16th February 2007, 12:22 PM	#2 (permalink)
ADI Tech Support All Star Join Date: Nov 2004 Location: Branson, MO Posts: 146	Re: Changing bed delay OOOOhhhhhh Amy You're not changing the delay in the right place. On the manager pro, hit Call/Menu. The dispay will read Security/Call. Press 3333 then enter. The display will read Get Params. Press Next. The Display will read Send Params, press next. The display will read Mgr Params. Press Enter. The display will read Mgr delay time. Press 5 then Enter. The display will read Mgr Start Mode. Press Clear. You Managers delay will now be 5 minutes. Kevin Barrett ADI Tech Support

16th February 2007, 12:28 PM	#3 (permalink)
bunz1969 All Star Join Date: May 2005 Location: at the salon - where else? Posts: 175	Re: Changing bed delay Rock on!! It worked. Apparently, I skipped that page while reading the User Guide.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode