HELP! Tmax manager pro wont stop buzzing at me - TanToday - Helping Salon Owners, One At A Time, Since 2000!

Shan · 21st February 2007, 07:03 PM

Sometimes when I unplug and replug it works, sometimes it doesn't. SOmetimes when I run a security scan it works, sometimes doesn't.

I just got 2 new 10 minute beds and the electrician that installed them for me had me order a new chip for one of the beds and he replaced it and that worked for about oh a day, then it started again.

I have had to unplug the tmax manager and run beds manually for now because my electrician had surgery this morning and I am LOST!

ANY help would be appreciated!
Thanks in advance!!!

Shan

Din · 21st February 2007, 07:05 PM

Does it ever stop the buzzing....is it intermittent?

Same happened to us....we installed a new printer on USB and everytime it printed something, the t-max manager would start buzzing. When the printing stopped, it would stop.

Conflicting somehow in the computer.

glowgirl35 · 21st February 2007, 10:33 PM

Make sure all of your connections are secure, all the timers are plugged in and nothing is touching the manager. I had printer and register plugged into my usb and it caused my suntouch program to freeze and mess up my manager. So, try to unplug any unnecessary things from your ports, check connections and do a full system scan. If that doesn't work, tell your freaking electrician that he messed up and your salon is more important than his surgery, haha!

tantechs · 22nd February 2007, 08:40 PM

Give me a call and I'll walk you thru some things to figure out what exactly your problem is.
When it starts buzzing, one of the lights under one of the beds on the manager will probably turn orange and it should say E-7 on the display.
Which bed turns orange?? or do several turn orange??

Tanning Techs
Jon Jones
816-694-7895

Shan · 23rd February 2007, 06:38 PM

Hey guys ~ Thanks for all of your help! I talked to someone at ADI and had my electrician come out and try some things he told us to do and it ended up being that my manager was toast! SO... hopefully that is the problem, cause the company I ordered a new one from doesn't accept returns on any electronics! :-0

Shan · 24th February 2007, 11:00 PM

Jon ~ When is a good time to call you? I ordered a new tmax timer, got it in today, plugged it up, re set all of the addresses just to make sure, then when I went into the rooms to auto address (you know after you scan and hit 888) then go to the rooms and they say "99"..... then you are suppose to hit the start button until it goes to 0, well, it doesn't go to zero, it starts flashing 88... I saw somewhere in the manual that says to hit the up button and that doesn't work either!?!?!
This is just the perfect time of year to be happening! UH!

21st February 2007, 07:03 PM	#1 (permalink)
Shan All Star Join Date: Mar 2006 Location: Texas Posts: 91	HELP! Tmax manager pro wont stop buzzing at me Sometimes when I unplug and replug it works, sometimes it doesn't. SOmetimes when I run a security scan it works, sometimes doesn't. I just got 2 new 10 minute beds and the electrician that installed them for me had me order a new chip for one of the beds and he replaced it and that worked for about oh a day, then it started again. I have had to unplug the tmax manager and run beds manually for now because my electrician had surgery this morning and I am LOST! ANY help would be appreciated! Thanks in advance!!! Shan __________________ Shan

21st February 2007, 07:05 PM	#2 (permalink)
Din Smartass Canuck Moderator Join Date: Feb 2005 Location: Canada Posts: 9,092	Re: HELP! Tmax manager pro wont stop buzzing at me Does it ever stop the buzzing....is it intermittent? Same happened to us....we installed a new printer on USB and everytime it printed something, the t-max manager would start buzzing. When the printing stopped, it would stop. Conflicting somehow in the computer. __________________ www.ChronosMarketing.com ____________________________________________ The problem nowadays is stupidity. Why don't we just take the safety labels off everything and see what happens?

21st February 2007, 10:33 PM	#3 (permalink)
glowgirl35 www.glowtanningcenter.com Join Date: Jan 2007 Location: MASS Posts: 369	Re: HELP! Tmax manager pro wont stop buzzing at me Make sure all of your connections are secure, all the timers are plugged in and nothing is touching the manager. I had printer and register plugged into my usb and it caused my suntouch program to freeze and mess up my manager. So, try to unplug any unnecessary things from your ports, check connections and do a full system scan. If that doesn't work, tell your freaking electrician that he messed up and your salon is more important than his surgery, haha!

22nd February 2007, 08:40 PM	#4 (permalink)
tantechs All Star Join Date: Jun 2005 Location: Independence, Mo. Posts: 159	Re: HELP! Tmax manager pro wont stop buzzing at me Give me a call and I'll walk you thru some things to figure out what exactly your problem is. When it starts buzzing, one of the lights under one of the beds on the manager will probably turn orange and it should say E-7 on the display. Which bed turns orange?? or do several turn orange?? Tanning Techs Jon Jones 816-694-7895

23rd February 2007, 06:38 PM	#5 (permalink)
Shan All Star Join Date: Mar 2006 Location: Texas Posts: 91	Re: HELP! Tmax manager pro wont stop buzzing at me Hey guys ~ Thanks for all of your help! I talked to someone at ADI and had my electrician come out and try some things he told us to do and it ended up being that my manager was toast! SO... hopefully that is the problem, cause the company I ordered a new one from doesn't accept returns on any electronics! :-0 __________________ Shan

24th February 2007, 11:00 PM	#6 (permalink)
Shan All Star Join Date: Mar 2006 Location: Texas Posts: 91	Re: HELP! Tmax manager pro wont stop buzzing at me Jon ~ When is a good time to call you? I ordered a new tmax timer, got it in today, plugged it up, re set all of the addresses just to make sure, then when I went into the rooms to auto address (you know after you scan and hit 888) then go to the rooms and they say "99"..... then you are suppose to hit the start button until it goes to 0, well, it doesn't go to zero, it starts flashing 88... I saw somewhere in the manual that says to hit the up button and that doesn't work either!?!?! This is just the perfect time of year to be happening! UH! __________________ Shan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode