T Max assistance - TanToday - Helping Salon Owners, One At A Time, Since 2000!

coldgyn · 28th February 2007, 11:43 AM

I had a car take out a power pole in front of my place yesterday. The power fluctuated and two of my beds (one was running, one was not) stopped communicating to my T Max. All the beds turned off when it fluctuated.

I have rebooted the T Max and the computer but it does not recognize the two rooms.

You can still operate the beds with the timer on the wall though. I suspect it is the communication chip and I've ordered more.

Could it be something else. I don't want to wait for the part and that end up not fixing it.

ADI Tech Support · 28th February 2007, 11:51 AM

Does the T-Max Manager still see these rooms?

If yes, communications chips are probably not bad.

If no, try re-addressing the beds. They could have just lost their addresses.

Kevin Barrett
ADI Tech Support

coldgyn · 28th February 2007, 12:45 PM

Quote:

Originally Posted by ADI Tech Support

Does the T-Max Manager still see these rooms?

If yes, communications chips are probably not bad.

If no, try re-addressing the beds. They could have just lost their addresses.

Kevin Barrett
ADI Tech Support

No it does not recognize the beds at all. Can you go through the re- addressing procedure for me?

socaltech · 28th February 2007, 01:06 PM

http://www.appdig.com/tmax/manuals/tmax_manager_pro.pdf

page 5-6 to program
page 10 for parameters

28th February 2007, 11:43 AM	#1 (permalink)
coldgyn Super Star Join Date: Jan 2005 Location: West Coast Posts: 636	T Max assistance I had a car take out a power pole in front of my place yesterday. The power fluctuated and two of my beds (one was running, one was not) stopped communicating to my T Max. All the beds turned off when it fluctuated. I have rebooted the T Max and the computer but it does not recognize the two rooms. You can still operate the beds with the timer on the wall though. I suspect it is the communication chip and I've ordered more. Could it be something else. I don't want to wait for the part and that end up not fixing it.

28th February 2007, 11:51 AM	#2 (permalink)
ADI Tech Support All Star Join Date: Nov 2004 Location: Branson, MO Posts: 146	Re: T Max assistance Does the T-Max Manager still see these rooms? If yes, communications chips are probably not bad. If no, try re-addressing the beds. They could have just lost their addresses. Kevin Barrett ADI Tech Support

28th February 2007, 01:06 PM	#4 (permalink)
socaltech All Star Join Date: Jun 2006 Location: los angeles Posts: 68	Re: T Max assistance http://www.appdig.com/tmax/manuals/tmax_manager_pro.pdf page 5-6 to program page 10 for parameters

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode