Auto addressing - TMAX Manager Pro - TanToday - Helping Salon Owners, One At A Time, Since 2000!

tanexpress2 · 13th June 2007, 11:32 AM

I'm having problems with auto addressing a T-Max manager pro. When I connect a Star Power K52 in the system it will pass the signal on to the beds after it in the chain, but when I try to adress the bed it will not address and it will not let the beds past it address. When I had wire the connection back together it let me address the beds past it. The display will not start blinking with the bed id in auto address mode.

Brian Oshman · 13th June 2007, 05:42 PM

Manually address it.

tantechs · 15th June 2007, 02:07 AM

If you have any questions on how to manually do it, give me a call..

Tanning Techs
Jon Jones
816-694-7895

13th June 2007, 11:32 AM	#1 (permalink)
tanexpress2 Rookie Join Date: Mar 2007 Location: Louisiana Posts: 6	Auto addressing - TMAX Manager Pro I'm having problems with auto addressing a T-Max manager pro. When I connect a Star Power K52 in the system it will pass the signal on to the beds after it in the chain, but when I try to adress the bed it will not address and it will not let the beds past it address. When I had wire the connection back together it let me address the beds past it. The display will not start blinking with the bed id in auto address mode.

13th June 2007, 05:42 PM	#2 (permalink)
Brian Oshman Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 7,041	Re: Auto addressing - TMAX Manager Pro Manually address it. __________________ Three can keep a secret if two are dead.

15th June 2007, 02:07 AM	#3 (permalink)
tantechs All Star Join Date: Jun 2005 Location: Independence, Mo. Posts: 159	Re: Auto addressing - TMAX Manager Pro If you have any questions on how to manually do it, give me a call.. Tanning Techs Jon Jones 816-694-7895

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode