Manager Error - TanToday - Helping Salon Owners, One At A Time, Since 2000!

aimeekat · 9th July 2007, 02:27 PM

Ok, so I get in yesterday and I see 1,2,3,4 all the way through 8 indicated on the manager. It's also reading beds 54-67 and won't scroll to bed 1-8 when I press the orange button.

My salon is set up with 7 3As, 1-6 and room 8, so 7 beds total (I just skipped rm 7 for future expansion).

I've removed power (AC adapter) from the manager and waited, plugged back in and nothing changed. I also reset the circut breaker to the 3As in the rooms, still nothing. When I bring up the ADNET2k program and do a rescan it just scrolls through saying "timeout 1000".

I'm running Helios and of course, it's not saying timers not responding.

Anyone have this problem? Keep in mind that I haven't opened yet, trying to learn how to work out some of the kinds before I do.

Din · 9th July 2007, 03:23 PM

Auto Address them. OR Could be a bad cable.

stan@sunsys · 9th July 2007, 07:12 PM

Sounds like your Manager is not booting up. Doesn't matter what cables or 3A's you have. You might be able to reload the software through your computer. But you'll probably have to send it in.

Or wait. If that's a new Manager, you might just have to press the "secret" button combination and it'll go to programing mode and boot up.

aimeekat · 10th July 2007, 05:47 PM

So after sending me to Radio Shack to get a new plug I ended up having to send it back.

And if there's a secret button, I wanna know. Sounds exciting!

Thanks for the help!

9th July 2007, 02:27 PM	#1 (permalink)
aimeekat Super Star Join Date: Mar 2007 Location: FL Posts: 991	Manager Error Ok, so I get in yesterday and I see 1,2,3,4 all the way through 8 indicated on the manager. It's also reading beds 54-67 and won't scroll to bed 1-8 when I press the orange button. My salon is set up with 7 3As, 1-6 and room 8, so 7 beds total (I just skipped rm 7 for future expansion). I've removed power (AC adapter) from the manager and waited, plugged back in and nothing changed. I also reset the circut breaker to the 3As in the rooms, still nothing. When I bring up the ADNET2k program and do a rescan it just scrolls through saying "timeout 1000". I'm running Helios and of course, it's not saying timers not responding. Anyone have this problem? Keep in mind that I haven't opened yet, trying to learn how to work out some of the kinds before I do.

9th July 2007, 03:23 PM	#2 (permalink)
Din Smartass Canuck Moderator Join Date: Feb 2005 Location: Canada Posts: 9,138	Re: Manager Error Auto Address them. OR Could be a bad cable. __________________ www.ChronosMarketing.com ____________________________________________ The problem nowadays is stupidity. Why don't we just take the safety labels off everything and see what happens?

9th July 2007, 07:12 PM	#3 (permalink)
stan@sunsys Veteran Join Date: Nov 2004 Location: Michigan Posts: 469	Re: Manager Error Sounds like your Manager is not booting up. Doesn't matter what cables or 3A's you have. You might be able to reload the software through your computer. But you'll probably have to send it in. Or wait. If that's a new Manager, you might just have to press the "secret" button combination and it'll go to programing mode and boot up.

10th July 2007, 05:47 PM	#4 (permalink)
aimeekat Super Star Join Date: Mar 2007 Location: FL Posts: 991	Re: Manager Error So after sending me to Radio Shack to get a new plug I ended up having to send it back. And if there's a secret button, I wanna know. Sounds exciting! Thanks for the help! Last edited by aimeekat : 10th July 2007 at 05:50 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode