Timer Chip HELP!! - TanToday - Helping Salon Owners, One At A Time, Since 2000!

exotictan · 13th July 2007, 07:52 PM

I am trying to change my T-max timer from a 15 minute to a 20 minute. I ordered a new chip, but when I put in the timer chip the screen on the t-max doesn't even light up. What should I do? Works fine with the 15 minute chip, but need my bed to go 18 minutes. (I have another bed like this and it worked just fine)

Tanning Queen · 13th July 2007, 08:35 PM

When you put the old chip back in it works ok? If so, I would say you have a bad chip. Get a new one and go from there.

W8INLINE · 13th July 2007, 08:47 PM

when changing chips do you rescan salon wide?

Brian Oshman · 13th July 2007, 11:06 PM

Is the chip in backwards? There is a dimple on one end. It must match the notch in the chip socket.

3A's do not need to be re-adressed when changing the time chip.

stan@sunsys · 14th July 2007, 12:37 AM

only if you're changing protocol chips. That is, Tmax - Intellitan or visa versa
but yea, sometimes the sticker on the chip is facing the other direction, so ignore the label, only pay attention to the dimple like Brian said.

13th July 2007, 07:52 PM	#1 (permalink)
exotictan Rookie Join Date: Jun 2007 Location: Texas Posts: 15	Timer Chip HELP!! I am trying to change my T-max timer from a 15 minute to a 20 minute. I ordered a new chip, but when I put in the timer chip the screen on the t-max doesn't even light up. What should I do? Works fine with the 15 minute chip, but need my bed to go 18 minutes. (I have another bed like this and it worked just fine)

13th July 2007, 08:35 PM	#2 (permalink)
Tanning Queen Moderator Join Date: Nov 2004 Location: Six degrees left of nowhere Posts: 5,025	Re: Timer Chip HELP!! When you put the old chip back in it works ok? If so, I would say you have a bad chip. Get a new one and go from there.

13th July 2007, 08:47 PM	#3 (permalink)
W8INLINE Hall of Famer Join Date: Dec 2004 Location: Global Posts: 1,971	Re: Timer Chip HELP!! when changing chips do you rescan salon wide? __________________ ......................Flashback 2001........................ "One of the 'ORIGINAL' TanToday Gang"

13th July 2007, 11:06 PM	#4 (permalink)
Brian Oshman Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 6,908	Re: Timer Chip HELP!! Is the chip in backwards? There is a dimple on one end. It must match the notch in the chip socket. 3A's do not need to be re-adressed when changing the time chip. __________________ Three can keep a secret if two are dead.

14th July 2007, 12:37 AM	#5 (permalink)
stan@sunsys Veteran Join Date: Nov 2004 Location: Michigan Posts: 467	Re: Timer Chip HELP!! only if you're changing protocol chips. That is, Tmax - Intellitan or visa versa but yea, sometimes the sticker on the chip is facing the other direction, so ignore the label, only pay attention to the dimple like Brian said.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode