| |
| |||||||
| Visit Our Sponsors! |
| T Max ADI Forum All you want to know about T Max Timers |
 |
| | LinkBack | Thread Tools | Display Modes |
12th April 2008, 06:37 PM
| #1 (permalink) |
| Rookie Join Date: Oct 2007 Location: Akron Ohio
Posts: 11
|  Setting 'max number of beds' in T-Max Manager Hello. We are going from 9 beds to 12 beds and need to set the MAX NUMBER OF BEDS in the T-Max Manager. It says to 3. "Press the Set buttons under displays 6, 7 and 8 until the number for security level 2 is displayed." We do not know the numbers for "security level 2" as we have no information on the T-Max as we just bought the salon. Is this a generic number? Thank you very much. |
|  |
| 12th April 2008, 06:39 PM | #2 (permalink) |
| Hall of Famer  Join Date: Jul 2006 Location: Canada Posts: 3,790 | Re: Setting 'max number of beds' in T-Max Manager Ooooh I was just about to tell you what mine was and I forget! __________________ ************************************************** ***************** Grammar Tip of the Year - Apostrophes are for condensing and belonging...NOT pluralizing.  SandiGirl ~ Changing tanning forums one apostrophe at a time.  |
| | |
| 12th April 2008, 06:40 PM | #3 (permalink) |
| Hall of Famer Join Date: Jul 2006 Location: Canada Posts: 3,790 | Re: Setting 'max number of beds' in T-Max Manager Okay, try 140. __________________ ************************************************** ***************** Grammar Tip of the Year - Apostrophes are for condensing and belonging...NOT pluralizing. SandiGirl ~ Changing tanning forums one apostrophe at a time. |
| | |
| 12th April 2008, 07:45 PM | #5 (permalink) |
| Hall of Famer Join Date: Jul 2006 Location: Canada Posts: 3,790 | Re: Setting 'max number of beds' in T-Max Manager Oh I wonder if they set mine at Sunwest before they sent it. __________________ ************************************************** ***************** Grammar Tip of the Year - Apostrophes are for condensing and belonging...NOT pluralizing. SandiGirl ~ Changing tanning forums one apostrophe at a time. |
| | |
| 12th April 2008, 08:22 PM | #8 (permalink) |
| Hall of Famer Join Date: Jul 2006 Location: Canada Posts: 3,790 | Re: Setting 'max number of beds' in T-Max Manager WHo knows, they could have even had me do it on the phone...not like I remember last week, let alone 4 yrs ago. That's my story and I'm stickin' to it. __________________ ************************************************** ***************** Grammar Tip of the Year - Apostrophes are for condensing and belonging...NOT pluralizing. SandiGirl ~ Changing tanning forums one apostrophe at a time. |
| | |
| 12th April 2008, 10:22 PM | #9 (permalink) |
| Rookie Join Date: Oct 2007 Location: Akron Ohio Posts: 11 | Re: Setting 'max number of beds' in T-Max Manager Well, thanks for the suggestions so far. Looks like I'll end up calling ADI. I was just really hoping to get the extra beds running tomorrow. Oh well. Thank you !!!!! |
| | |
| 13th April 2008, 12:02 AM | #10 (permalink) |
| Veteran Join Date: Nov 2004 Location: Michigan Posts: 459 | Re: Setting 'max number of beds' in T-Max Manager The code Rob gave is/was correct for the Manager. However, your step "3" doesn't look right to me. If you want to try to walk through it tomorrow instead of waiting until ADI on Monday, call me at 248-763-0764 and I'll try to get you to parameter mode. |
 | |
| 13th April 2008, 11:42 AM | #11 (permalink) |
| Off The Chain Moderator  Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 6,166 | Re: Setting 'max number of beds' in T-Max Manager Sounds like you have the regular manager with 8 displays. To set the max bed number press and hold down the start/stop buttons under display 1 and 8 until the displays change. Under display 3 press the set button until the display shows the max number of beds you want then press the change display beds button on the lower left corner of the manager to save the changes. There are no codes for this version, it uses a key instead if it has a key lock installed. If it has the key then make sure the key is oriented in the horizontal position if the manager case is vertical hanging on a wall. The key edge will point towards the displays. This will allow you to access the parameters. __________________      Three can keep a secret if two are dead. |
| | |
| 13th April 2008, 11:49 AM | #12 (permalink) |
| Veteran Join Date: Nov 2004 Location: Michigan Posts: 459 | Re: Setting 'max number of beds' in T-Max Manager ADI started shipping these a year or so ago with a security code to be used before parameters can be accessed. That code is 2222. I won't post the exact steps, but once in the parmeters, the steps are the same as above. |
| | |
|
| Thread Tools | |
| Display Modes | |
| |
www.islcovetravel.com 
Linear Mode
