Can't get last room? - TanToday - Helping Salon Owners, One At A Time, Since 2000!

Natureboy · 24th June 2008, 05:41 PM

Ok, have a CCSIV up front. And SIP series T-3a's for some of the rooms and the last three rooms are on the little intellitan boxes.

I can not get the CCSIV to see the last room.

There is 9 rooms. Tried using patch cables between 8 and 9 to be sure it was not the cables. Still didn't work. (The rooms are addressed correctly, checked twice).

So then, changed out the intellitan box on room 8 for a new one. Addressed it right. Same thing. It see's room 8 but not nine. So I replaced room 9 with the intellitan box that was originally in room 8 because I know it worked. Still don't see it. Tried patch cords again, no luck.

I am lost here. I have done many stores and never had this problem so strange. Do I need a terminator wire? Do I have to tell the CCSIV there is only 9 rooms somehow? There is a lot of wire in the whole daisy chain network. Is it too long and it won't see the last room?

Any ideas? I seem to have covered all bases.

Rob · 24th June 2008, 05:45 PM

I am pretty sure you have to tell it there are 9 rooms to look for.

Brian Oshman · 24th June 2008, 06:27 PM

Yup, set max bed number to 9.

Natureboy · 24th June 2008, 07:59 PM

Quote:

Originally Posted by Brian Oshman

Yup, set max bed number to 9.

I was thinking that. Ok, anyone remember how to set that? Or is there a CCSIV manual online somewhere?

I guess it would make sense if it was set to 8 rooms by chance from before as I bought it used.

navigatin1 · 24th June 2008, 08:24 PM

http://gsd.custhelp.com/cgi-bin/gsd.... 1281&p_olh=0

Natureboy · 24th June 2008, 08:53 PM

Right on thanks. I have that book somewhere. I will try it out on thursday.

Island Cove · 24th June 2008, 11:34 PM

yep, she had 8 beds. so that sounds right. lol

Brian Oshman · 25th June 2008, 12:10 AM

Press call/menu, press in level three code (default is 3333) then enter, (shows get params) then hit next, (shows send params) next, (shows mgr params) then enter. Shows mgr delay time, hit next, Shows start mode, hit next, shows mgr max bed hit 9 then enter, then hit next, next, next, etc... then hit enter and it will store that setting.

Natureboy · 26th June 2008, 04:39 PM

That was it. Works fine now. Just been years since I had to set that max bed.

24th June 2008, 05:41 PM	#1 (permalink)
Natureboy Moderator Security Join Date: Dec 2004 Location: Canada, just north of 50 Posts: 2,931	Can't get last room? Ok, have a CCSIV up front. And SIP series T-3a's for some of the rooms and the last three rooms are on the little intellitan boxes. I can not get the CCSIV to see the last room. There is 9 rooms. Tried using patch cables between 8 and 9 to be sure it was not the cables. Still didn't work. (The rooms are addressed correctly, checked twice). So then, changed out the intellitan box on room 8 for a new one. Addressed it right. Same thing. It see's room 8 but not nine. So I replaced room 9 with the intellitan box that was originally in room 8 because I know it worked. Still don't see it. Tried patch cords again, no luck. I am lost here. I have done many stores and never had this problem so strange. Do I need a terminator wire? Do I have to tell the CCSIV there is only 9 rooms somehow? There is a lot of wire in the whole daisy chain network. Is it too long and it won't see the last room? Any ideas? I seem to have covered all bases. __________________ Original Tantoday Class of 2000! Tellin' it like it is. www.millenniumtan.com

24th June 2008, 05:45 PM	#2 (permalink)
Rob Old ******** Member Join Date: Nov 2005 Location: Canada Posts: 884	Re: Can't get last room? I am pretty sure you have to tell it there are 9 rooms to look for. __________________ www.islcovetravel.com

24th June 2008, 06:27 PM	#3 (permalink)
Brian Oshman Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 7,041	Re: Can't get last room? Yup, set max bed number to 9. __________________ Three can keep a secret if two are dead.

24th June 2008, 08:24 PM	#5 (permalink)
navigatin1 Super Star Join Date: Jun 2005 Location: It's My Money Now! Posts: 746	Re: Can't get last room? http://gsd.custhelp.com/cgi-bin/gsd.... 1281&p_olh=0

24th June 2008, 08:53 PM	#6 (permalink)
Natureboy Moderator Security Join Date: Dec 2004 Location: Canada, just north of 50 Posts: 2,931	Re: Can't get last room? Right on thanks. I have that book somewhere. I will try it out on thursday. __________________ Original Tantoday Class of 2000! Tellin' it like it is. www.millenniumtan.com

24th June 2008, 11:34 PM	#7 (permalink)
Island Cove The Good, The Bad, The Banned Join Date: Feb 2005 Posts: 2,187	Re: Can't get last room? yep, she had 8 beds. so that sounds right. lol

25th June 2008, 12:10 AM	#8 (permalink)
Brian Oshman Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 7,041	Re: Can't get last room? Press call/menu, press in level three code (default is 3333) then enter, (shows get params) then hit next, (shows send params) next, (shows mgr params) then enter. Shows mgr delay time, hit next, Shows start mode, hit next, shows mgr max bed hit 9 then enter, then hit next, next, next, etc... then hit enter and it will store that setting. __________________ Three can keep a secret if two are dead.

26th June 2008, 04:39 PM	#9 (permalink)
Natureboy Moderator Security Join Date: Dec 2004 Location: Canada, just north of 50 Posts: 2,931	Re: Can't get last room? That was it. Works fine now. Just been years since I had to set that max bed. __________________ Original Tantoday Class of 2000! Tellin' it like it is. www.millenniumtan.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode