question about wireless.... - TanToday - Helping Salon Owners, One At A Time, Since 2000!

Robbie25 · 27th July 2008, 06:24 PM

I just bought 6 wireless t/max timers from someone on this site. They came in fine, no problems there. Some of the posts I've read about them make it seem like I also need the 3/A timers as well. Is this the case, or am i fine just haveing the wirelss timers? I'm a bit lost here. Any help would be appreciated, thanks.

stan@sunsys · 27th July 2008, 10:18 PM

Depends on what kind of beds you have. If your beds have Tmax timers on them and are "wireless ready", then you just need the G2 access point. If your beds just have Tmax timers on them and are not "wireless ready", then you also need the power injector. If your beds don't have Tmax 3A's or an oem equivalent, then you also need a 3A room timer to hook up to the remote timer wires coming from the beds. In that case, you can get use the 3A's that are "wireless ready", which go by another name that excapes me at the moment, and plug in an access point (transmitter) to each 3A.

Brian Oshman · 27th July 2008, 11:05 PM

27th July 2008, 06:24 PM	#1 (permalink)
Robbie25 All Star Join Date: May 2008 Location: Fredericton Posts: 81	question about wireless.... I just bought 6 wireless t/max timers from someone on this site. They came in fine, no problems there. Some of the posts I've read about them make it seem like I also need the 3/A timers as well. Is this the case, or am i fine just haveing the wirelss timers? I'm a bit lost here. Any help would be appreciated, thanks.

27th July 2008, 10:18 PM	#2 (permalink)
stan@sunsys Veteran Join Date: Nov 2004 Location: Michigan Posts: 459	Re: question about wireless.... Depends on what kind of beds you have. If your beds have Tmax timers on them and are "wireless ready", then you just need the G2 access point. If your beds just have Tmax timers on them and are not "wireless ready", then you also need the power injector. If your beds don't have Tmax 3A's or an oem equivalent, then you also need a 3A room timer to hook up to the remote timer wires coming from the beds. In that case, you can get use the 3A's that are "wireless ready", which go by another name that excapes me at the moment, and plug in an access point (transmitter) to each 3A.

27th July 2008, 11:05 PM	#3 (permalink)
Brian Oshman Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 6,428	Re: question about wireless.... 3w.. __________________ Three can keep a secret if two are dead.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode