Ergo 450 Classic... - TanToday - Helping Salon Owners, One At A Time, Since 2000!

thenewsundeck · 14th July 2008, 06:25 PM

Ok, just yesterday my 450 decided it doesn't want to start the fans when you start the session.

Even after a full session, no cooling fans!

Body fans, facials, everything else works fine. Cannot find any loose connections...

Any suggestions?

Brian Oshman · 15th July 2008, 09:32 AM

Fan board.

thenewsundeck · 15th July 2008, 01:47 PM

Once again....right on the money. Actually had 2..not 1, but 2 spares! Changed it out, did the trick!

PM me your address so I can at least send you a gas card or something for your expertise!

You saved me again!

Thanks Brian.

14th July 2008, 06:25 PM	#1 (permalink)
thenewsundeck All Star Join Date: Dec 2006 Location: KY Posts: 213	Ergo 450 Classic... Ok, just yesterday my 450 decided it doesn't want to start the fans when you start the session. Even after a full session, no cooling fans! Body fans, facials, everything else works fine. Cannot find any loose connections... Any suggestions? __________________

15th July 2008, 09:32 AM	#2 (permalink)
Brian Oshman Off The Chain Moderator Join Date: Nov 2004 Location: The Sun Doctor, Califon, NJ Posts: 7,041	Re: Ergo 450 Classic... Fan board. __________________ Three can keep a secret if two are dead.

15th July 2008, 01:47 PM	#3 (permalink)
thenewsundeck All Star Join Date: Dec 2006 Location: KY Posts: 213	Re: Ergo 450 Classic... Once again....right on the money. Actually had 2..not 1, but 2 spares! Changed it out, did the trick! PM me your address so I can at least send you a gas card or something for your expertise! You saved me again! Thanks Brian. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode