Ergoline Classic 600 Problem - TanToday

islandsun4 · 4th July 2009, 02:51 PM

Hi Guys I have an Ergoline Classic 600 it keeps throwing up an e010 code which I know is a facial temperature code. The part I'm stuck on is why. All facials are seated correctly,fans seem to be working facial glass properly installed. No fan board code. Are there fuses that's go bad related to this?Is there something I can check behind the facial buckets Thanks for your help !!!!!

wreet2 · 5th July 2009, 08:11 AM

check the shoulder tanner, my came apart and caused that same thing

islandsun4 · 5th July 2009, 11:44 AM

I'll check on that and let you know. Thanks

islandsun4 · 5th July 2009, 12:42 PM

Tried it and no go. Still over heating. Where else should I check ?

Brian Oshman · 5th July 2009, 07:46 PM

There is a tiny fan mounted on each bucket. Make sure they are running. Also, add more A/C, Just because it was running for a period of time with inadequate A/C coesn't mean that it is not a problem, The temp sensors are probably weakened from running hot.

islandsun4 · 6th July 2009, 08:47 AM

I'll check the fans behind the facial buckets. Are there seperate sensors for each facial? Thanks Brian

northtanman · 6th July 2009, 10:53 AM

also make sure both fans are running that blow air down thru the middle of the upper canopy. one fan is the air right over the face while the other blows down on the body from the middle vents above. i've had the rubber mounts go bad twice on my 650...and when a fan stpped working...it overheats as well. while the bed is on...you should feel air coming down, both at the face vents and the body vents in the upper middle set of vents that run the lenght of the upper canopy.

islandsun4 · 6th July 2009, 11:20 AM

Removed facial buckets and pulled out facial assembly turned on bed and face tanner fan mounted to back isn't running. I'm going to check anouther facial bucket to see if that fan is running or if I picked the right one. Brian thanks again for the info!

islandsun4 · 6th July 2009, 01:00 PM

Ok just removed the first two buckets seems like neither of the fans on the back of the buckets are working. I'll check a third. Is there a fuse or board that could have went bad to check next.

islandsun4 · 7th July 2009, 11:22 AM

Ok no fans spinning at all for facials. Took out facial fan pcb looks fine nothing burnt on underside looked at fuse and it looks fine. Noway to check fuse going get another just in case. I'll let you know. If anyone has any ideas please chime in I'm running out of ideas. Thanks Again

islandsun4 · 9th July 2009, 10:45 PM

All fixed! Ended up being facial fan board. $90 For board 2 minutes of work.

northtanman · 9th July 2009, 10:53 PM

awesome! glad you got it fixed....

4th July 2009, 02:51 PM	#1 (permalink)
islandsun4 All Star Join Date: Sep 2005 Posts: 143	Ergoline Classic 600 Problem Hi Guys I have an Ergoline Classic 600 it keeps throwing up an e010 code which I know is a facial temperature code. The part I'm stuck on is why. All facials are seated correctly,fans seem to be working facial glass properly installed. No fan board code. Are there fuses that's go bad related to this?Is there something I can check behind the facial buckets Thanks for your help !!!!!

5th July 2009, 08:11 AM	#2 (permalink)
wreet2 All Star Join Date: Aug 2006 Posts: 130	Re: Ergoline Classic 600 Problem check the shoulder tanner, my came apart and caused that same thing

5th July 2009, 11:44 AM	#3 (permalink)
islandsun4 All Star Join Date: Sep 2005 Posts: 143	Re: Ergoline Classic 600 Problem I'll check on that and let you know. Thanks

5th July 2009, 12:42 PM	#4 (permalink)
islandsun4 All Star Join Date: Sep 2005 Posts: 143	Re: Ergoline Classic 600 Problem Tried it and no go. Still over heating. Where else should I check ?

5th July 2009, 07:46 PM	#5 (permalink)
Brian Oshman Hall of Famer Join Date: Nov 2004 Posts: 9,264	Re: Ergoline Classic 600 Problem There is a tiny fan mounted on each bucket. Make sure they are running. Also, add more A/C, Just because it was running for a period of time with inadequate A/C coesn't mean that it is not a problem, The temp sensors are probably weakened from running hot. __________________ Brian Oshman (click for private message) The Sun Doctor Authorized Supra® Dealer (click for website) 908-797-0716 Brianoshman@aol.com (click for e-mail) ITA Member 2010 Someone has to say it

6th July 2009, 08:47 AM	#6 (permalink)
islandsun4 All Star Join Date: Sep 2005 Posts: 143	Re: Ergoline Classic 600 Problem I'll check the fans behind the facial buckets. Are there seperate sensors for each facial? Thanks Brian

6th July 2009, 10:53 AM	#7 (permalink)
northtanman The Good, The Bad, The Banned Join Date: Sep 2006 Posts: 2,971	Re: Ergoline Classic 600 Problem also make sure both fans are running that blow air down thru the middle of the upper canopy. one fan is the air right over the face while the other blows down on the body from the middle vents above. i've had the rubber mounts go bad twice on my 650...and when a fan stpped working...it overheats as well. while the bed is on...you should feel air coming down, both at the face vents and the body vents in the upper middle set of vents that run the lenght of the upper canopy.

6th July 2009, 11:20 AM	#8 (permalink)
islandsun4 All Star Join Date: Sep 2005 Posts: 143	Re: Ergoline Classic 600 Problem Removed facial buckets and pulled out facial assembly turned on bed and face tanner fan mounted to back isn't running. I'm going to check anouther facial bucket to see if that fan is running or if I picked the right one. Brian thanks again for the info!

6th July 2009, 01:00 PM	#9 (permalink)
islandsun4 All Star Join Date: Sep 2005 Posts: 143	Re: Ergoline Classic 600 Problem Ok just removed the first two buckets seems like neither of the fans on the back of the buckets are working. I'll check a third. Is there a fuse or board that could have went bad to check next.

7th July 2009, 11:22 AM	#10 (permalink)
islandsun4 All Star Join Date: Sep 2005 Posts: 143	Re: Ergoline Classic 600 Problem Ok no fans spinning at all for facials. Took out facial fan pcb looks fine nothing burnt on underside looked at fuse and it looks fine. Noway to check fuse going get another just in case. I'll let you know. If anyone has any ideas please chime in I'm running out of ideas. Thanks Again

9th July 2009, 10:45 PM	#11 (permalink)
islandsun4 All Star Join Date: Sep 2005 Posts: 143	Re: Ergoline Classic 600 Problem All fixed! Ended up being facial fan board. $90 For board 2 minutes of work.

9th July 2009, 10:53 PM	#12 (permalink)
northtanman The Good, The Bad, The Banned Join Date: Sep 2006 Posts: 2,971	Re: Ergoline Classic 600 Problem awesome! glad you got it fixed....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode