whitesun chronos

[greg judson]

Can anyone tell me anything about a chronos bed? I am thinking about buying a 2006 whitesun chronos- my nerves are telling me to run away but I'm like a moth to the flame because the price is so low for a bed that has quite a bit of wow factor. something has to be wrong with it. I could probably fix many problems but I can't even find anything about servicing this thing. It has about 1800 hrs- is 33000 watts, etc. I'm worried about servicing/parts of course, does anyone know a supplier for parts? I can't even find a manual online or get a manual from the reseller- and I've talked to the owner of the closed salon that it came out of. He can't help me with a manual either. He says that it worked "fine" when the reseller/repo removed it from the salon. This was probably oriiginally invoiced at 28000

Any solid info would be a great help- thanks

greg judson@hotmail.com

[John]

my nerves are telling me to run away

Yes, run very fast.

Unless you can get it for like $3000 or less. It tans just fine, parts will be an issue.

[uv2021]

Chronos parts are no problem.It uses the same glass and lamps as the magic,ballast and ignitors no problem .Acrilics all available.Tantech can supply you with all the parts and advice you need on this machine.I own 2 of them,very popular beds.6,000 plus hrs and counting on one 3500 hrs on the othor.circut boards are very reliable.Sun italia originally desinged the board,so you don't need to rely on white sun.

call patryk 1800 550 4056

[dbl-a]

How much is cheap? How much did the salon owner sell it for? Should help you offer bottom $.

[engfant]

I think the biggest question would be do you have 100amps available for this monster?

[engfant]

Holy white sun and their crazy designs!
.:: WHITESUN: welcome to the future ::.

[greg judson]

thanks uv2021- you don't have an owner's manual for this bed by any chance that you could email or copy or anything? I've talked to patryck, he is actually familiar with the exact bed that I am may be buying. I am concerned because the salon owner of this bed bought a second chronos to use as a backup for this one. The bed he got for parts is now missing a small circuit board. He removed it to put into the bed I am buying. Patryck is having a hard time obtaining a circuit board for the second bed. The quality of this more recently made bed is in question. I think that it might have to do with a statement about whitesun that he told me. He stated that whitesun used to make a better product than it has in recent years.

[greg judson]

Hi engfant, yea I have prepared the salon for a few monster beds' juice- wow that sounds deviant- I mean yes I have just enough power in two rooms for 125A breakers- but we'll see what my power bill does

[greg judson]

dbl-a, I've negotiated 5k for the bed. the salon owner gets 2/3 of the purchase price- the relister gets 1/3

[coldgyn]

I've had two in the past. They Tan very very well. Some parts took a little tracking down but I always found what I needed 5K is a very reasonable price. They are very impressive during tours and the results rock.

[dbl-a]

$5k is cheap. You should offer a few grand for the other one too.

[uv2021]

Yes I do have a manual.If you need it let me know and I can get you a copy.

[John]

How much is a replacement acrylic for those? Where can you get one?

[greg judson]

Thanks UV2021 That would be great if you could send me a copy of the manual. I am buying the bed. My address is gregjudson@hotmail.com
greg judson
3215 Ben Hogan Lane
Billings, MT, 59106

Thanks for your help

[greg judson]

uv2021 are you still able to help me? I'd even pay a reasonable amount for it

[uv2021]

You can reach me at 416-200-8267.

[splicer9]

I own one of these monsters and love it! My customers love it too. Its a great money maker. We did have to bring in additional power for it though. If the HUGE transformer box is NOT included then I wouldnt buy it. Make sure its included in the price.

If you got or can get the power for it its a great deal.