diva 7 has 01 error code HELP - TanToday

wreet2 · 13th October 2009, 04:15 AM

I have a diva 7 that starts up normal and then shuts down right away and give a code 01 on the display any help on this one? I by passed all the safety and air cond. but no luck

UV MAN · 14th October 2009, 09:53 PM

Is this the error code that is NOT in the Manuel?

Off the top if my head the only fix was the main circuit board that goes for about $1,000.00. This is off the top of my head but we had an error code that was not listed in the book and there was no other fix for it from tech support.

I don't have the book near me but I think it was the Error 01.

wreet2 · 15th October 2009, 03:16 AM

I changed out the board from another bed and that wasnt it either

RobertK · 15th October 2009, 08:35 AM

Have you called Jason from KBL America? He will know off the top of his head.

Here is the manual for the newer version:
http://www.kblamerica.com/images/tec...s%20Manual.pdf

UV MAN · 16th October 2009, 02:59 PM

Ok, E01 is the Emergency Stop being pressed. So it is a different error code then I thought.

I would check the connector to the customer control panel. Could be loose or bad connection. Might need a new control panel as there is not much else unless there is a relay.

If you unplug this connector will the bed run?

13th October 2009, 04:15 AM	#1 (permalink)
wreet2 All Star Join Date: Aug 2006 Posts: 131	diva 7 has 01 error code HELP I have a diva 7 that starts up normal and then shuts down right away and give a code 01 on the display any help on this one? I by passed all the safety and air cond. but no luck

14th October 2009, 09:53 PM	#2 (permalink)
UV MAN Veteran Join Date: Jun 2007 Posts: 421	Re: diva 7 has 01 error code HELP Is this the error code that is NOT in the Manuel? Off the top if my head the only fix was the main circuit board that goes for about $1,000.00. This is off the top of my head but we had an error code that was not listed in the book and there was no other fix for it from tech support. I don't have the book near me but I think it was the Error 01.

15th October 2009, 03:16 AM	#3 (permalink)
wreet2 All Star Join Date: Aug 2006 Posts: 131	Re: diva 7 has 01 error code HELP I changed out the board from another bed and that wasnt it either

15th October 2009, 08:35 AM	#4 (permalink)
RobertK Still a Rookie Join Date: Dec 2007 Posts: 1,705	Re: diva 7 has 01 error code HELP Have you called Jason from KBL America? He will know off the top of his head. Here is the manual for the newer version: http://www.kblamerica.com/images/tec...s%20Manual.pdf __________________ Robert Klem Superior UV Technologies

16th October 2009, 02:59 PM	#5 (permalink)
UV MAN Veteran Join Date: Jun 2007 Posts: 421	Re: diva 7 has 01 error code HELP Ok, E01 is the Emergency Stop being pressed. So it is a different error code then I thought. I would check the connector to the customer control panel. Could be loose or bad connection. Might need a new control panel as there is not much else unless there is a relay. If you unplug this connector will the bed run?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode